Operation Guide
1. Charge
The battery is built-in lithium rechargeable battery, so when you use it the first time, please charge firstly. The method for charging as following:
1.) Use adaptor: connect 5V charger plug with USB cable, then plug into electrical connector receptacle, it can be charged.
2.) Connect computer: use USB cable to connect the computer, then it can be charged.
3.) When you charge it, the Led indicator will keep flashing.When the Led indicator bright, means the machine finished charging.
4.) At this time,if the TF card capacity is enough,the machine can record video about 120 minutes，or can record longer separate recording.
Notice: when battery power is not enough, the machine will enter into protection mode, so it cannot be turn on. Please charge for it.
2. Operation Guide
1) Power on:
Please confirm already insert the TF card in the slot.
Press Start button to POWER ON, long press start button, the red light lit, enter the standby mode.
No memorycard: red and bluelightsflashfivetimessimultaneouslyshut down.
Memorycard is full: red and bluelightsflash simultaneouslyeighttimesshutdown.

2) Modebutton: each press this button once, can beswitched to thevarious operating modes,when the power on and enter the standby mode:
press this button once,into->①normal Videomode(power-on default standby);
press this button Twice,into-> ②Photo mode;
press this button Three times,into->③Audio recordingmode;
press this button four times,into->④Motion Detectionmode;
press this button five times,again into->①normal Videomode-> ......
(each press one time, thecamera tothe aboveorder cycleto the nextcorrespondingstandby)

3) Normalvideo mode:
After power on,The defaultaccessintonormalVideo mode, thenred lightlit, bluelight turns off.
At this pointa shortpressthe Start button, the red light flashes three timesthenturns off, start video recording.
In therecordingprocess, press the Start buttonagainto stop recordingand save thevideo file.Red lightlit, back to normalVideo modestandby.

4) Photo mode:
When in the normalVideo modestandby,short pressMode buttononce,the red light flashesoncelit,bluelight is off,enter the Photomode standby.
At this pointa shortpressthe Start button, the red light flashes once,it take a photo, and red lightlit, back to photo modestandby.

5)Audio recordingmode:
When in the Photo modestandby,shortpressMode button, the red light is off,the blue lightlit,intoAudio recordingstandby.
At this pointa shortpressthe Start button, the blue light flashes three timesthengoes off,intoAudio recordingstate.
During Audio recording, press the Start buttonagainto stoprecordingand save the audiofile, the blue lightlit,back to Audio recordingstandby.

6) Motion DetectionMode:
When inthe Audio recordingstandby,shortpressMode button, red and blue lightslit ,intoMotion Detectionstandby.
Motion Detection: Short pressthe Start button, red and blue lightsflashes three times,andthendual lampgoes out, intomotion detection recordingstate.
(When motion,it recordingtwo minutesafragment, whether it have or no recording video, the lightare keptoffstate)
In theMotion Detection recordingprocess, press the Start buttononce, stop andsave the videofile, then dual-lamplit, back toMotion Detectionstandby.

7) Inall of thesemodes,if it is instandby mode, press the Mode buttononceyou can switch tothe nextmode.