Features:

• Winding length (1 turn of handle) (cm): 82
• Gear ratio: 7.3
• Weight (g): 210
• Maximum drag force (kg): 5
• Standard winding amount nylon (lb.-m): 14-100 / 16-85 ※ TD line (nylon) is used.
• Bearing (ball / roller): 10/1
• TWS (T-wing system): With the mechanism that the level wind of T shape turns half turn according to clutch ON / OFF.
• During casting, the level wind rotates forward, and the line is smoothly discharged through the wide part of the T shape level wind.
• At the time of retrieving, the level wind turns half way in the form of falling in the backward direction, the line is guided in the groove of the lower level wind, and it is wound tightly and in parallel.
• Frequent fly, control performance improves, falls are fast, backlash is also less.
• Daiwa's TWS improves all basic performance of the bait reel.
• Magshield Ball Bearing: Daiwa's original waterproof and durable technology "Magshield" was applied to ball bearings as "Magshield ball bearings".
• The biggest merit is to eliminate salty garbage, rust and noise and to maintain initial performance for a long time.
• Not limited to reel, approximately every ball bearing is used for a certain period, the rotation performance deteriorates due to wear of the ball.
• However, conventional reel ball bearings often failed to be used due to salt garbage and rust before the ball worn.
• This changes completely with the mug shield.
• Even without maintenance, ball bearings will be able to fulfill "original life expectancy".
• In addition, since the mug shield ball bearing is a non-contact structure in which a mild oil fills a slight clearance between the inner ring and the electrode plate, the rotational resistance is originally very small.
• When compared to bearings using rubber packing inside for waterproofing, the difference in their rotational feel is clear.
• Smooth rotation with zero friction zero is kept surprisingly long without special care.
• It goes without saying how epauque this is.
• G1 DLC spool made of duralumin: It is made of "G1 duralumin" which is about 1.3 times stronger than ultra-duralumin used for spool as aluminum-based strongest material.
• Real Precision (High Accuracy) Spool: Ultra high precision spool which contributes not only to noise at the time of casting or to spool fluctuation extremely small, comfortable, trouble-free and to increase the flight distance.
• Compared with ordinary spools, there are merits that "you can earn distance without force and" small "light lure is easy to handle".
• Magforth Z long distances tune: By changing the spool to the Magforth Z specification (movable inductive rotor type), it is effective when the strong brakes of the early stages of the cast are required, the setting is set so that the brake becomes weak in the second half, and as a result the rising
• The optimum brake for long-range truck that gains lightness and elongation in the second half of casting.
• UTD (Ultimate Tournament Drag): Together with the dragging start of the drag, the line is drawn out with uneven smoothness, but it also has the maximum drag force that works as much as it tightens.
• Drag washer and grease which adopted the new material, its performance is enhanced by increasing the diameter.
• Due to the waterproof system applied on it, it exhibits stable drag performance under any circumstances.
• 90 mm Crank handle & 2 CRBB specification I knob: Crank handle that brings powerful & speedy, highly sensitive retrieve feel with handling close to the reel center.
• Speed ​​shaft: When spool free, separates spool and shaft part, supports spool only with BB.
• Since it becomes shaftless and there is no extra resistance, ideal spool rotation can be obtained.
• Super Metal Frame: Super Metal (High Strength Aluminum) frame made of high rigidity against twisting at reeling, enabling powerful winding with reduced power loss.

Product information:

Shipping Weight: 312 g

Package Dimensions: 7.11 x 10.79 x 13.79 cm