Product Description
Item ShowKingFast F6 2.5" SATAIII (6Gb/s) 7mm 60GB/128GB SSD for Computer Internal Hard Drives
Note: 1GB is mean 1,000,000,000Bytes. In computer 1GB = 1024x1024x1024Bytes, So you could actual use (How many GB you purchase x 1,000,000,000)/1024/1024/1024 = actual GB could use
About KingFast SSD:
Solid State Drives, or SSDs, are increasingly common in small form factor computing like laptops and netbooks; but SSDs are also used in the desktop and enterprise space by those looking leverage the speed of an SSD to get maximum performance. While solid state drives have several benefits, including speed, longevity and practically no noise output.
KingFast 2.5 inch SATAIII SSD (Solid State Drive) is a high performance and high reliability storage device based on NAND Flash technology that designed to solve the bottleneck of computing system by traditional hard disk drives. 2.5inch SATAIII SSD can be plugged into a standard SATAIII connector commonly found in desktops, IT-STB, industrial PCs and thin client systems, compatible with Windows, MAC, Linux and else OS. With a high performance and low power consumption, Our SATA SSD can be a good storage device for NB and Tabletop PC.
KingFast SSD purely consists of semiconductor devices and NAND flash memories, without any moving parts. It gives rugged features against shock and vibration, used in extreme environment such as industrial PC to increase MTBF. Furthermore, Our SSD has highly advanced flash memory management algorithm to guarantee higher performance and data integrity.
Features:
• SATA III (6Gb/s)
• 7mm Ultra-thin Design
• Extreme performance
• Lower price
• Ideal Choice for Ultrabook/Notebook/Desktop
60GB SSD
Based spec:
Interface: SATAIII
- Dimension: 100*70*7 mm
- Capacity: 60GB
- Flash type: MLC NAND Flash
- Model: KF2710MCJ15-060
Read/Write Performance:
Sequential Read: Up to 400MB/s
- Sequential Write: Up to 80MB/s
- 4KB Random Read IOPS: 10242
- 4KB Random Write IOPS: 27129
- 4KB Random Read IOPS:9999
- 4KB Random Write IOPS:483
- Response Time: 0.2ms
Power Consumption:
Power Supply: 5V+5%
- Standby : 0.3W
- Maximum Ripple : 70 mV(peak to peak)
- 4KB Random Write: 2W
Reliability:
Write endurance: 8 years at 100G write/day(32G)
Read endurance: unlimited
MTBF: >2,000,000 hours
Data retention: >20years at 25
Data destroy do not support
Sudden power-off recovery support
Support: S.M.A.R.T,NCQ,Trim and dynamic power management.
Static and dynamic wear-leveling
Bad block management algorithm
ECC: Supports BCH ECC 12/14/40 bits in 1024 bytes
Environment:
Storage temperature: -55~95
Operation temperature: 0~70
Humidity: 5%~95%
Vibration: 20G
Shock: 1500Gs
Specifications:
1)Physical Dimensions: Parameter Value
Length(Parameter): 100+0.1mm(Value)
width (Parameter): 70+0.1 mm(Value)
height(Parameter): 7+0.1 mm(Value)
Table 3 Physical dimensions of the driver
2) Interface Mode:
The interface of the 2.5” SATA SSD complies with the standard Serial ATA version 3.1:
-Host Transfer Rate is 600MB/s(6.0Gb/s)- Read/Write
-PIO mode 0,1,2,3,4
-DMA mode 0,1,2
-UDMA mode 0,1,2,3,4,5
128GB SSD
Based spec:
Interface: SATAIII
- Dimension: 100*70*7 mm
- Capacity: 128GB
- Flash type: MLC NAND Flash
- Model: KF2710MCJ15-128
Read/Write Performance:
Sequential Read: Up to 500MB/s
- Sequential Write: Up to 110MB/s
- Response Time: 0.2ms
Power Consumption:
Power Supply: 5V+5%
- Standby : 0.3W
- Maximum Ripple : 70 mV(peak to peak)
- 4KB Random Write: 2W
Reliability:
Write endurance: 8 years at 100G write/day(32G)
Read endurance: unlimited
MTBF: >2,000,000 hours
Data retention: >20years at 25
Data destroy do not support
Sudden power-off recovery support
Support: S.M.A.R.T,NCQ,Trim and dynamic power management.
Static and dynamic wear-leveling
Bad block management algorithm
ECC: Supports BCH ECC 12/14/40 bits in 1024 bytes
Environment:
Storage temperature: -55~95
Operation temperature: 0~70
Humidity: 5%~95%
Specifications:
1)Physical Dimensions: Parameter Value
Length(Parameter): 100+0.1mm(Value)
width (Parameter): 70+0.1 mm(Value)
height(Parameter): 7+0.1 mm(Value)
Table 3 Physical dimensions of the driver
2) Interface Mode:
The interface of the 2.5” SATA SSD complies with the standard Serial ATA version 3.1:
-Host Transfer Rate is 600MB/s(6.0Gb/s)- Read/Write
-PIO mode 0,1,2,3,4
-DMA mode 0,1,2
-UDMA mode 0,1,2,3,4,5
Reliability:
1) ECC Descriptions:
Please refer to FIG. 5 that is a diagram illustrating an allocating method of a spare area in each page of a NAND flash memory, where in the specific ECC algorithm utilizes a Bose, Chaudhuri and Hocquengham (BCH) ECC algorithm. When a BCH 16 ECC algorithm encodes the data in the NAND flash memory, the parity code generated in the encoding process may occupy 28 bytes of the spare area in each page. When a BCH 24 ECC algorithm encodes the data in the NAND flash memory, the parity code generated in the encoding process may occupy 42 bytes of the spare area in each page. When a BCH 16 algorithm decodes the data in the NAND flash memory, the data can be decoded correctly if the error bit happened in two sectors (1024Bytes) is 16. When a BCH 24 algorithm decodes the data in the NAND flash memory, the data can be decoded correctly if the error bit happened in two sectors is 24.
Figure 5 Allocation for ECC algorithm BCH in Nand Flash
2) Advance Wear-Leveling Algorithm:
The NAND flash devices are limited by a certain number of write cycles. When using a file system, frequent file table updates is mandatory. If some area on the flash wears out faster than others, it would significantly reduce the lifetime of the whole device, even if the erase counts of others are far from the write cycle limit. Thus, if the write cycles can be distributed evenly across the media, the lifetime of the media can be prolonged significantly. The scheme is achieved both via buffer management and specific advanced wear leveling to ensure that the lifetime of the flash media can be increased, and the disk access performance is optimized as well.
3) S.M.A.R.T Function:
S.M.A.R.T. is an acronym for Self-Monitoring, Analysis and Reporting Technology, an open standard allowing disk drives to automatically monitor their own health and report potential problems. It protects the user from unscheduled downtime by monitoring and
storing critical drive performance and calibration parameters. Ideally, this should allow taking proactive actions to prevent impending drive failure. SMART feature adopts the standard SMART command B0h to read data from the drive. When the SMART Utility running on the host, it analyzes and reports the disk status to the host before the device is in critical condition.
Applications:
Upgrading your PC with a KingFast SSD is the most economical way to breathe new life into an aging PC or laptop. The F8 series reads, writes and multi-tasks at incredible speeds, enhancing boot-up speed, application loading and multi-tasking performance. It's more than an upgrade, it's a complete transformation of your computer.
Package Includes- 1 x KINGFAST F6 2.5" 60GB/128GB SSD Solid State Disk Drive
- 1 x User Guide