Description:

1. Make sure that batteries are installed in the remote controller. Press the remote-control button, the LED indicator light will light.
2. Checking the remote controller: Press the buttons on the remote controller one by one, the indicator light will light. If the indicator light doesn't light or goes dim, change the batteries.
3. When the receiver is in standby mode, the power indicator light installed in the receiver will light. If it doesn't light or goes dim, it of the means that the electricity battery is not enough, then you should use the appropriative charger to charge it.
4. Checking the receiver: connect the static testing bulb with the static poles, press the remote buttons one by one, then the receiver will release static, you can hear a "papa" sound from the receiver. When the testing bulb is connected with the poles, it will light. Every button has its own static mode.
5. Press the little button, the receiver will vibrate, which can be used to send the master's meaning "allowing" .
6. The static and vibration of the receiver stand for the order or intention from the master. you should let the dog understand and remember them by training it. After each successful check, you should let the pet know what should be done and what should not be done. After a number of trainings the pet will understand what you like and don't like.
7. Adjust the length of the collar to fit the neck of the pet. The proper tightness should be that you can insert a finger in between.
8. Prepare some socks for the dog as rewards for good deeds. This will make better effect in the training.
9. Open the inset buckle of the collar and put the collar round the neck of the pet. Adjust the tightness of collar so that you can insert a finger in between.
10. Most pets feel uncomfortable at first wearing the collar. Don't use any of the functions at that time until you are sure that the pet has gotten used to the collar. The static function is used to curb the improper deeds of the pet. Don't use it casually or to make fun of the pet.
11. You can call your dog soundlessly by "weak vibration " in a long distance.
12. If you don't use this product, take the battery out of the remote control, so as to prolong the lifetime of the batteries.
13. There is a vibration sensor switch in the receiver, you just need to put it alone, then the power of it will be turned off automatically.

Operational instructions:
1 Open the insert buckle of the collar and put the collar round the neck of the pet. Adjust the tightness of collar that you can insert a finger in between.
2 Most pets feel uncomfortable at first wearing the collar. Don`t use the shock function at that time until you are sure that the pet has gotten used to the collar. The shock is used to curb the improper deeds of the pet. Don`t use it casually or to make fun of the pet.
3 You can call your dog soundlessly by vibration in a long distance, or you can use the "B-B" sound.
4 If you don`t use this product, turn off the power of the remote controller, so as to prolong the lifetime of the batteries.
5 There is a vibration sensor switch in the receiver , you just need to put it alone, then the power of it will be turned off automatically.

How to charge the batteries:
1 The lithium batteries installed in the remote controller and the receiver can be recharged. Please use the charger the product offers to charge it .
2 The display screen of the remote controller can show the electricity of the battery. If the electricity of the battery is not enough, then you should charge it at once.
3 After the receiver is turned on, it is in a standby state. In the standby state, it only consumes small amount of electricity. A frequent use of it will consume electricity quickly. Therefore you should often check the batteries by watching the indicator light. When the electricity of the batteries is not enough , please use the appropriative charger to charge the batteries..

Introduction for the transmitter:
Press the buttons on the remote controller one by one, the indicator light will light. If the indicator light doesn't light or goes dim, change the batteries.
When the receiver is in standby mode, the power indicator light installed in the receiver will light. If it doesn't light or goes dim, it of the means that the electricity battery is not enough, then you should use the appropriative charger to charge it.

Introduction for the receiver:
connect the static testing bulb with the static poles, press the remote buttons one by one, then the receiver will release static, you can hear a "papa" sound from the receiver. When the testing bulb is connected with the poles, it will light. Every button has its own static mode.
5. Press the little button, the receiver will vibrate, which can be used to send the master's meaning "allowing" .

Notes:These three modes could be combined freely, so please set those modes,you don't want at the level 0.

Package included:
1) Multi-function training collar device X1.
2) Remote control unit X 1.
3) Adjustable snap collar X 1.
4) Collar testing unit (Clips to collar and lights up to tell you the shock action is operating) X 1.
5) Operating Instructions X 1.
6) USB cable x 1

0704024

There are many payment methods available on DHgate.com such as credit cards, real-time bank transfers, offline payments (bank transfers and Western Union). You can choose a method which is the most convenient for you. To protect your interests, your payment will be temporarily held by DHgate, and will not be released to us until you receive your order and are satisfied with it.

1. Shipping cost: Click “Shipping and payment” tab on the product detail page, and you will see the delivery details. You can calculate shipping cost by inputting the required information.

2. Time in transit: Transit time varies with different shipping methods.

3. Item Processing Time: The processing time for a specific order varies with the product type and stock status. Mostly, processing time can be 3 to 15 working days.

If you want to exchange the items received, you must contact us within 3 days of the receipt of your order. And you should pay the additional shipping fees incurred and the items returned should be kept in their original status.

Since your feedback is very important to our business`s development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. It`ll just take you 1 minute. Thank you!