=====================================A==================================


New Arrivel wooden LED Clock

Large: 15*3.8*6.8cm













Product details








=====================================B==================================

Features

100% Brand New.
Material Wooden
LED Display Wooden Clock.
Displays Time, Date, and Temperature alternately.
Sound activated.
12 and 24 hour formats can be selected (initial mode 24 hour).
Optional Three Alarm Settings with “beep” sound lasting 1 minute.
Dual Power Supply 3 x AA battery or DV5V500MA adaptor.
When the power is off, the internal battery will come into operation.
The LED display will be off for energy saving, but the clock will still be running.


Buttons

Set To access the settings mode.
UP To change the TimeDate in settings mode. In normal mode to change Temperature Format
Down To change the TimeDate in settings mode. In normal mode to turn Alarm Function ONOFF.
VS To turn Sound Activation function ONOFF
Reset To return back to Factory Setting
YearDateTimeAlarm Setting
Press SET for 3 seconds to access the settings mode.
1. When YEAR is flashing press UP or DOWN to change the YEAR, then press SET to go to DATE setting;
2. When MONTH is flashing press UP or DOWN to change the MONTH, then press SET to go to DAY setting;
3. When DAY is flashing, press UP or DOWN to change the DAY, then press SET to go to TIME setting;
4. When HOUR is flashing, press UP or Down to change the HOUR; then press SET to go to MINUTE setting;
5. When MINUTE is flashing, press UP or DOWN to change the MINUTE; then press SET to go to Time Format Setting;
6. When “24H12H” time format is showing, press UP or DOWN to change the time format.


Temperature Format Setting

Press UP to change the temperature format between 0C 0F.
Three Alarms Function Setting Instructions
1. Press DOWN button, 000 will show up to set the first Alarm (Remark The Initial mode of the three alarms is on. To turn OFF, press DOWN button again, “- - A1” will show up. To turn back on, press UP button, it will go back to 000).
2. Press SET, the HOUR will flash and press UPDOWN to change the hour;
3. Press SET again; the MINUTE will flash and press UPDOWN to change the minute;
4. Press set again, it will show up 000 for the second Alarm setting. Use the same way to set the second and third alarm or turn off the Alarms (with display “- - A2” and “- - A3”) like the setting of first Alarm.
5. After setting the third Alarm, press SET and will go back to normal display mode.


Important Notice

1. This product is made from wood. Please keep in a dry environment.
2. Please use high alkaline AA batteries for this product.
3. If there is no display or displays ‘error’, please press RESET to return back to the factory setting and then re-set the time.
4. When the LED display light becomes less visible or flashes continuously, this means you must replace the batteries soon.
5. Please ensure that you place the batteries in straight alignment, so that all the batteries are functioning together.
6. Please set this Alarm Clock as per these Operating Instructions