Product Description
Main Features Media Type Supported: Twisted Pair Ethernet Technology: Fast Ethernet Network Standard: 10/100Base-TX Network (RJ-45): Yes Serial Port: Yes Number of Network (RJ-45) Ports: 1 Number of Serial Ports: 1 Height: 4.3 Width: 6.4 Depth: 2.1 Marketing Information The ELK-M1XEP is an Ethernet Device Server with a RS-232 Serial Port Interface. It may be used to connect a Control in the M1 Family to an Ethernet network using TCP-IP protocol for programming, remote control and monitoring. It features a secure embedded web server, with a user interface built on a Java applet, and email event notification. A software setup utility is built into ElkRP (version 1.5.0 or later) for configuring the connection setup, network password, etc. The M1XEP is factory defaulted to obtain a dynamic IP address from a DHCP server (i.e. Ethernet switch, cable modem, etc.), however it may also be setup with a static IP address. Package Contents ELK-M1XEP Ethernet Device Server ELK-W040A Serial Ribbon Cable Information Name: ETHERNET PORT F/M1 Category: Other Equipment UPC Code: 762158550164 General Information Brand Name ELK Manufacturer ELK Products, Inc Manufacturer Part Number M1XEP Product Model ELK-M1XEP Product Type Device Server Refurbished Not Applicable UPC 762158550164 Weight 1.2 lbs I/O Expansions Expansion Slots Not Applicable Interfaces/Ports Interfaces/Ports 1 x RJ-45 Male 10/100Base-TX Network LAN1 x DB-9 Male Serial RS-232 Management & Protocols Management HTTPS DHCP HTTP Security Features SSL 3.0 TLS 1.0 FIPS 128 bit encryption Media & Performance Data Transfer Rate 80 Mbps Ethernet800 Mbps Fast Ethernet Miscellaneous Additional Information Web server with embedded Java applet M1 Virtual Keypad 2.1mm barrel type power connector (center positive) Package Contents ELK-M1XEP Ethernet Device Server ELK-W040A Serial Ribbon Cable Network & Communication Ethernet Yes Ethernet Technology Fast Ethernet Wi-Fi Not Applicable Wi-Fi Standard Not Applicable Physical