Feature:
1.Take one minute get your camera become a wireless camera.
2.Wireless 2.4GHz transmitter/receiver set (12-Volt for vehicle installation).
3.Connects to rear-view camera and front video screen.

Installation:
1.Take out your stock license plate light at the back of your car.
2.Fix the camera to where the stock license plate light was.
3.Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power.
4.Connect the wireless module (transmitter) to your camera via the two cables - yellow plug for AV output and black plug for power.
5.Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative.
6.Connect the wireless module (receiver) to your car monitor - yellow plug for AV input.
7.Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative.
8.You will see the images when your car is in reverse shift.

Fitment:
For Mercedes Benz C-Class W203 E-Class W211 / CLS-Class W219

Package Included:
1 X CCD Sensor Reverse Camera 1 X 2.4 Ghz Transmitter
1 X 2.4 Ghz Receiver  











Specification:
Product Name CCD Sensor Reverse Camera
Image sensors 1/3" color sharp CCD
TV System NTSC default & PAL request
Minimum illumination <0.5
BLC Auto
White Balance Auto
Working Power (DCV) 12V
Video Color Colorful
Sync System Internal
Waterproof Class IP67IP68
Effective Pixels 648x488
Resolution 480TV lines
Video Output 1.0Vp-p,75Ω
Electronic Shutter 1/60(NTSC)-1/10000S
S/N Ratio Better Than 48db
Lens Angle 170°
Operation Temperature -20°C~80°C RH95% MAX
Storage Temperature -30°C~85°C RH95% MAX
Current Consumption No more 150mA
Horizontal Sync Frequency 15625KHZ
Work Range Up to about 50m(Hollowness)
Transmitter/Receiver Cable Length 1.5m
Weight 160g
Package Box Size About 120mm*80mm*65mm(L*W*H)
Application Fit all RCA composite video connections