Description:<br /> <br />Scope:<br /><br />1. Suitable for lead-acid batteries, lithium iron, three other power lithium battery<br />(Note: Different undervoltage protection corresponding to different materials, <br />such as ternary lithium single string 3.7V, 10 string 37V enter protection; <br />lithium iron single string 2.4V, 11 string 27V ingress protection)<br /> <br />2. For gear within 1000W brushless motors, gearless motors, high speed motors and other motors<br /> <br /> <br />Controller: <br /><br />1. When the battery voltage is less than the soft under-voltage automatic current reduction<br /> <br />2. Automatic Identification motor phase and angle, can be used to debug line learning.<br />Operation: Connect the power cord, power door locks wire, electrical wire, Hall-line, <br />turn the lines, learning lines, turn on the power and lock, motor automatic operation, <br />at this time if the rotational direction is correct, then disconnect learning lines, complete learning ;<br /> immediately connected to the opposite direction if the line is disconnected <br />after learning motor automatically switches the direction of rotation of the motor can be rotated automatically switches direction <br />(Note: to learn from the line stays open)<br /> <br />3. The dual-mode 4-in-1, ultra-quiet start, stepless speed, power output balance and stability, rich and powerful to meet the most models<br /><br />Specification:<br /> <br />Model: 15 dual-mode<br />Rated power range of options: 500W-1000W<br />Maximum current selection range: 20A-40A<br />Battery voltage protection point: 20v \/ 31v \/ 42v \/ 53v \/ 56v<br />Adaptive motor phase angle: 60 degrees \/ 120 degrees<br /> <br />Package included:<br /><br />1 x Brushless Controller