?Product Overview-- Size:17.71*39.37in. Material: PVC electrostatic membrane. Paste method: electrostatic adherence paste method.
?Use--Heat insulation in the summer and heat preservation in the winter. No adhesive, removable without any residue, static cling, easy to apply and can be applied several times.
?Design--Tulip flower 3D design static cling embosed decorative privacy etched glass window film vinyl.Chinese characteristics paper-cut window grilles pattern window film, add sweet and fashionable feeling for your room.Can be trimmed or combined to fit any size window and glass wall.
?UV Defense--Block more than 99% of harmful ultraviolet rays,protect the physical health.To prevent floor,curtain,carpet,furniture,art and many fabrics fade aging.
?Suitable Places--To be installed on the surface of glasses in shower room, bathroom, kitchen, bedroom, living room, office and etc.

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 1.89 inch
Height : 1.81 inch
Length : 18.82 inch

Item Weight: 0 ounce (View shipping rates and policies)
Shipping Weight: 4.8 ounce (View shipping rates and policies)

ASIN : B01N41NB51

Product Description

Features of Window Glass Film
1.Static specialty, donot use any adhesive.
2.Provides maximum privacy and allows light in.
3.90% Anti-UV, reduce time of using air conditioner, low-carbon and energy conservation.
4.Easy to stick and rip, reuse and protect your window glass, no trace left.
5.You can remove, wash and reset this many times as needed.
6.Moreover, it would hold up well in extreme weather conditions, no shrink when the temperature changes.
Heat insulation in the summer and heat preservation in the winter.
7.This style of window film is widely used on smooth glass surfaces in the bathroom, balcony, living room, bedroom and office.

Installation Method:
Step 1. Keep Window or Glass clean.
Step 2. Wet it with water ( Soapy water will be the best choice ).
Step 3. Remove the film from backing paper or release liner, a paper or plastic-based film sheet
(Please make sure you have removed it before you apply the window film to glass. It may be a little tricky to remove at first, but be assured there is a backing paper or release liner on all window films.
Sometimes it can be a bit of a challenge to separate the paper but it will easily come off once you get it started.
Use two pieces of tape and stick them to opposite sides at one corner of the film...then pull these two pieces of tape apart and the paper should separate from the film.)
Step 4. Apply to wet glass & smooth with hands.
Step 5. Squeegee away water & air bubbles.

Notice:
If you want to remove it, simply peel the window film from any corner. It comes off cleanly without leaving residue.
1>When not in use, the film must be replaced and stored on the original backing paper.
The side of the film that touched the glass should face the glossy side of the backing paper.
2>Our membrane does not apply to carved, over frosted or irregular glass.