LAN / WAN Connectivity
 WAN ports: 0
 
 LAN ports: 1
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 Dynamic DNS client: no
 
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
 WiFi modes: Access point
Wireless client
Wireless bridge (PtP)
Multipoint bridge (PtMP)
Repeater mode
 internal antenna(s): 0
 external antenna(s): 2
 ext antenna(s) removable ?: yes
 Antenna connector: RP-TNC (Reverse TNC)
 Default SSID: linksys
 Multiple SSID: no
 WDS compatible: no
 Device Management
 Default IP address: 192.168.1.245
 Default admin username: (blank)
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
Windows application
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Misc hardware info
 Chipset: BCM4710, 125MHz
 RAM: 8 Mb
 Flash Memory: 2 Mb
 SNMP support: SNMP v.1
 NTP client: no
 Third-party firmware support: yes
DD-WRT
 Notes: v.1.0, v.1.1 have 8Mb or 16Mb RAM, 2Mb or 4Mb flash memory; v.2.0, v.3.0 have 8Mb RAM, 2Mb flash memory