BON FM-070SC 7S 7" On Camera Field Monitor built in SDI, Converter

Bon-FM-070SC-01

OVERVIEW

FM-070SC is a 7" on-camera monitor which can be attached onto DSLR or ENG camera. It comes with true HDMI-to-SDI converter and many other features.

Bon-FM-070SC-02

FEATURES

3G SDI Signal Reception

This monitor can accept HD/SD SDI and loop out HD/SD SDI up to 3G (1920x1080 50p, 60p)

HDMI-to-SDI Converter With 1:1 Resolution Mapping

BON's embedded HDMI-to-SDI converter preserves the HDMI's original resolution in its SDI output stream. HDMI users now no longer need to carry expensive and bulky HDMI-to-SDI converter to review their recording in SDI domain.

Get the right angle and focus

Focus Assist, Customizable Markers, and False Color functions are helpful to get the right angle and focus.

Waveform/Vectorscope

Enables users to check the luminance level and the chrominance values of the image.

16Ch Audio Level

Can display audio levels up to 16 channels at the top or bottom of the screen.

Focus Assist

Focus assistance function detects the focus level of video input and indicates the exact area of sharp edges within the video with desired color (Red/Green/Blue). The detectable sharpness is user-defined, so the user can achieve desired focus level of image accurately.

False Color

The brightness levels of the image are filled with different colors to check the over-exposed or under-exposed area.

Various Preset/Customizable Markers

4:3, 16:9, 1.85:1, 2.35:1 and more preset markers are useful to check the crop area. And the user can also adjust the marker position by selecting user marker.

Various Battery Types

Operatable with Sony(Type L), Panasonic(Type 1), Canon(Type 1, for 5DMkII/60D/7D) batteries.
(e.g. Sony NP-F970/NP-F570, Panasonic CGA-D54, Canon LP-E6)

Zoom for Canon 5D Mark II

Zoom-in/out preset allows fully scaled-up monitoring of contracted video from Canon 5D Mark II. Zoom-in/out area can also be customized to allow partial or full view of other video input without loss of resolution.

Firmware Update with USB Memory

Firmware is updateable via USB without PC.

2 Asssignable Function Keys

Pixel-to-Pixel View

Freeze Frame

H/V Flip

H/V Delay

Exposure Y/C Range Check (SDI)

Time Code Display (SDI)

Tally Display/Tally LED Control Output

All of our products are customized for Korean electric environment.
In Korea, we use 220 Voltage and Type C plug.
Some products has a adapter and in that case, they support Free Voltage and Type C plug.
Please pay attention to this point.

SPECIFICATIONS

LCD

Size	7.0”
Resolution	1024 x 600
Pixel Pitch	0.05 x 0.150 mm
Color Depth	8bit (6bit + 2bit FRC),16.7M
Viewing Angle(deg)	R/L:170, U/D:170
Luminance of White	400 cd/m
Contrast	800 : 1
Display Area (H x V)	153.6 x 90.0 mm (6.0 x 3.5 inches)
Back Light	LED
Surface Treatment	Transflective

1 x SDI	BNC port for HD/SD-SDI, 3G/1.485G/270M
1 x Composite	1.0Vp-p, 75Ω BNC port
1 x HDMI	HDMI (with HDCP v.1.1), 19pin Female

1 x SDI Loop	BNC port for Active Loop-Through Output
1 x Composite Loop	1.0Vp-p, Active Loop Output, 75ΩBNC port
1 x SDI	HD/SD-SDI BNC port for HDMI Conversion

SMPTE 425M AB	1080p (60,59.94,50), Direct Mapping(MS1,2,3,4) 2 x HD-SDI(3G), 2 x SMPTE 292M
SMPTE 274M	1080i /60,59.94,50,24sf, 23.98sf 1080p /30,29.97,25,24,23.98
SMPTE 296M	720p /60,59.94,50
SMPTE 260M	1035i /60,59.94
SMPTE 259M, 125M	480i /60,59.94
ITU R-BT.656	576i /50
HDMI	~1920 x 1080/60p
Analog (Composite)	1.0Vp-p(with sync), NTSC/PAL

1 x GPIO	RJ-45 Control port(with Tally Output Control, 0.5A max)
1 x USB	USB HOST for Firmware Update
Power Requirements	DC 7V ~ 36V max or AC adapter(100 – 230V,50Hz/60Hz)
Power Consumption	14.5(W)
Operating Temperature	-10°C ~ 40°C (14°F ~104°F)
Operating Humidity	20% ~ 80% RH
Weight	786g (1.43 lbs)
Dimensions	182 x 141 x 36 mm (7.1 x 5.6 x 1.4 inches)
Accessories	• AC Adapter • Manual (CD) • Cleaner