The Betaflight_3.1.0_OMNIBUS F3+OSD Brushless Flight Controller runs Betaflight_3.1, the latest firmware that supports Dshot ESC drive. It uses the MPU6000 over SPI for the best possible flight performance. The CPU is STM32F303CCT6 (72MHz, 256K FLASH). Built-in 5V BEC outputs 500mA current. It is also equipped with buzzer port and PDB distributer for ESCs. Built-in voltage detection and alarm function let you know when the battery is low. Measuring 27cm*27cm only, it is mini and lightweight.

FEATURES

Run betaflight_3.1, the latest firmware that supports Dshot ESC drive
Use the MPU6000 over SPI for the best possible flight performance
The CPU is STM32F303CCT6 (72MHz, 256K FLASH)
The sensor is SPI Sensor MPU-6000 triaxial accelerometer / triaxial gyroscope
Built-in 5V/500mA BEC
With buzzer port
With PDB distributor for ESCs
Supports BLheli suite ESC programme
Built-in voltage detection and alarm function Receiver:
Support Sbus or serial port RX port, Spektrum 1024/2048, SBUS, XBUS, SumD and SumH RX, built-in inverter
Support 3.3v Spektrum satellite receiver
Support PPM receiver Receiver Configuration:
SBUS or DSM receiver input, please configurate RX3 as input interface
DSM receiver powered from 3.3V
SBUS and PPM from 5V

Specifications

Item Name	Betaflight 3.1 F3 6DOF Mini Flight Controller
Size	27x27mm
Mounting Holes	20x20mm
Weight	0.11oz / 3.23g
Betaflight Target	Betaflight_3.1.0_OMNIBUS
CPU	STM32F303CCT6(72MHZ, 256K FLASH)
Sensor	SPI Sensor MPU-6000 Triaxial Accelerometer / Triaxial Gyroscope
Power Supply	2-3S (7.4V-12.6)
BEC	Built-in 5V/500mA
With Buzzer Port	Yes
With PDB Distributor for	ESCs
Supports	BLheli Suite ESC programme
Built-in	Voltage Detection and Alarm Function

Package Includes

1 x Betaflight 3.1 F3 6DOF Mini Flight Controller