Features:
Durable full-spit bubble air stone， dazzling underwater bubble layer
Increase the surface ventilation disturbances， promoting underwater supplemental oxygen
To help spread the underwater concentrations of carbon dioxide
Fill with stone， sit at the bottom of tank steady
Excellent sealed design， can be fully submerged in water.
Can connect to air pump for air bubble billow effect.(Air pump not included)
Energy saving， low heat， long-lasting

Note:
1. Indoor use only. Please keep the power adapter and joint away from water.
2. Air pump is not included

How to Install:
1. Check whether the light is broken or there are any cracks. If not， then follow the steps below.
2. Test the light before putting it into fishbowl. Plug the slot into socket， and switch on.
If all the LEDs are working， then it is normal.
3. Clean the surface that is used for fixing the sucker of the light.
4. Connect transform and turn on the switch.

Specifications:
Waterproof Rate: IP68
Light source:18 Pcs LEDs
Power: 1.2W
Adapter Voltage: 220-240V 50/60Hz
Adapter Output: DC 12v 3W
LED color:Multicolor(Automatic flash)
Light source:18 Pcs LEDs
Diameter: Approx. 106mm
Height: 19mm
Cable Length: Approx3M (there may be a 1-2cm error)
Air tube Length: Approx 1.5M
Total Weight: 300g

Package Include:
1 X 18 LED Round Bubble Light
1 X Air tube
1 X Sucker
1 X 12V DCAdapter (UK Plug)