DIY FG085 DDS Digital Synthesis Function Generator Kit With Panel
Feature:
If you have technical problem， please contact jyetek@gmail.com ， ONLY FOR technical problem
This kit not include the power supply !!!!!!!!!!Note: This kit with panel，if you need no panel version，please search SKU226166
The output signal types: sine， square， triangle， positive and negative sawtooth， positive and negative staircase， user-defined arbitrary waveforms， and servo control signal
Frequency range: 0 - 200KHz (sine)
Frequency resolution: 1Hz
Frequency accuracy: 0.149Hz (when F!#!amp!*!gt; 40Hz time)， 0.000596Hz (when F !#!amp!*!lt;= 40Hz time)
Cycle Resolution: 1ms
Amplitude range: 0 - 10V pp
Amplitude accuracy: 0.1V
DC offset range: -5V - + 5V
DC offset Accuracy: 40mV
Waveform memory depth: 256 bytes
Maximum sample rate: 2.5Msps
Trigger Input Level: High 3.5V (minimum)， low 1.5V (maximum)
When the trigger waveform output delay: less than 5 subtle
Synchronous output: TTL level
Output Impedance: 50 ohm
Power supply voltage: 15V DC
Supply Current: !#!amp!*!lt;150mA (no load) Example: 1) The output frequency is set to 5KHz， key operation: [F \/ T] [5] [KHz] 2) the output amplitude is set to 3V peak to peak， key operation: [AMP] [3] [V] 3) The DC offset is set to -2.5V， key operation: [OFS] [+\/-] [2] [5] [V] [.] The main operating modes: Fixed-frequency mode (CW) Sweep mode (SWEEP) Servo signal patterns (SERVO)
Please click here to download the Assembly Guide
Package included:
1 x FG085 DDS Digital Synthesis Function Generator Kit With Panel