Datasheet
Volition™
Category 6 cable 100Ω, UTP
Belonging to the 3M™ Volition™ Network Solutions, UTP Category 6 cable will deliver the best performance when used with the 3MTM RJ45 jacks, to give highest margins over Category
6 / TIA/EIA 568 and ISO 11801 and EN 50173 Class E standards.
An integral cross separator structure ensures permanent stability of the physical structure for enhanced long term performance and reduced crushing risk at cable anchorage points.
The cable sheath has length marking which is easy and convenient for the installer and gives a clear identification of cable and link lengths.
As a 3MTM branded product, it offers 3MTM system identity for corporate and warranty approval.
|
Features |
Benefits |
||
|
|
Excellent electrical performance |
Good headroom over Category 6 Performance |
|
|
Length marking on the cable sheath |
|
Installer friendly |
|
|
|
Low smoke zero halogen(LSOH) and PVC versions available |
|
Solution for all levels of fire protection |
|
Reference Standards |
IEC 61156-5; ANSI/TIA-568-C.2 |
Transmission Performance according to ANSI/TIA 568-C.2 Cat.6
|
|
Frequency |
Fitted |
Attenuation |
NEXT |
PSNEXT |
ACRF |
PSACRF |
|
|
|
Impedance |
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
(MHz) |
(Ω) |
(dB) |
(dB) |
(dB) |
(dB) |
(dB) |
|
|
|
|
|
Max. |
Min. |
Min. |
Min. |
Min. |
|
|
|
1 |
|
2.0 |
74.3 |
72.3 |
67.8 |
64.8 |
|
|
|
4 |
|
3.8 |
65.3 |
63.3 |
55.8 |
52.8 |
|
|
|
10 |
|
6.0 |
59.3 |
57.3 |
47.8 |
44.8 |
|
|
|
16 |
|
7.6 |
56.3 |
54.3 |
43.7 |
40.7 |
|
|
|
20 |
100 |
8.5 |
54.8 |
52.8 |
41.8 |
38.8 |
|
|
|
31.25 |
10.7 |
51.9 |
49.9 |
37.9 |
34.9 |
|
|
|
|
± 15 |
|
||||||
|
|
62.5 |
15.4 |
47.4 |
45.4 |
31.9 |
28.9 |
|
|
|
|
|
|
||||||
|
|
100 |
|
19.8 |
44.3 |
42.3 |
27.8 |
24.8 |
|
|
|
125 |
|
22.4 |
42.8 |
40.8 |
25.9 |
22.9 |
|
|
|
200 |
|
29.0 |
39.8 |
37.8 |
21.8 |
18.8 |
|
|
|
250 |
|
32.8 |
38.3 |
36.3 |
19.8 |
16.8 |
|
|
Frequency |
Return Loss |
Propagation |
Delay |
|
|
Delay |
Skew |
|||
|
|
|
|||
|
(MHz) |
(dB) |
(ns) |
(ns) |
|
|
|
Min. |
Max. |
Max. |
|
|
1 |
20.0 |
570.0 |
|
|
|
4 |
23.0 |
552.0 |
|
|
|
10 |
25.0 |
545.4 |
|
|
|
16 |
25.0 |
543.0 |
|
|
|
20 |
25.0 |
542.0 |
|
|
|
31.25 |
23.6 |
540.4 |
45 |
|
|
62.5 |
21.5 |
538.6 |
|
|
|
100 |
20.1 |
537.6 |
|
|
|
125 |
19.4 |
537.2 |
|
|
|
200 |
18.0 |
536.6 |
|
|
|
250 |
17.3 |
536.3 |
|
Specification
|
Construction |
Technical characteristics at 20°C |
|
Conductor : Bare copper wire AWG24 |
DC resistance : Max. 9.38 Ω/ 100m |
|
Insulation : Polyethylene, nom. 0.95mm |
Resistance unbalance : max. 2% |
|
Outer jacket : PVC or LOSH |
Insulatio resistance(500V) : min. 5000 M Ω/Km |
|
Cable diameter : 5.4mm+/- 0.3mm |
Mutual capacitance : nom. 5.1 nf/100m at 1kHz |
|
|
Capacitance unbalance(pair to ground) : max. 160 pf/100m |
|
|
Nominal velocity of propagation : nom. 67% |
|
|
Dielectric strength : 1kV/ 1min. |
|
Ordering Information |
|
Ref. No. |
|
|
|
|
|
Volition™, Category 6 cable, 100 Ω |
|
VOL-6UP4-305 |
|
Volition™ Cat.6 Cable, UTP, PVC, 24AWG, 4 pairs, 305m box |
|
|
|
Volition™ Cat.6 Cable, UTP, LSOH, 24AWG, 4 pairs, 305m box |
|
VOL-6UL4-305 |
Important Notice
The details contained in this literature have been carefully prepared from information available to 3M at the time of its production. However, it is not intended to be relied upon for purposes of product specification and you should contact your sales representative if specification details are required. Because of the wide variety of processes and conditions in which these products may be used, the user should first carry out tests to determine the suitability of the products for the particular use intended. All questions of warranty and liability relating to 3M products are governed by the selling 3M subsidiary's Terms of Sale subject where applicable to the prevailing law.
3M is trademark of the 3M company. SID is a trademark of Quante AG.
3M Telecommunications
Important Notice
The details contained in this literature have been carefully prepared from information available to 3M at the time of its production. However, it is not intended to be relied upon for purposes of product specification and you should contact your sales representative if specification details are required. Because of the wide variety of processes and conditions in which these products may be used, the user should first carry out tests to determine the suitability of the products for the particular use intended. All questions of warranty and liability relating to 3M products are governed by the selling 3M subsidiary's Terms of Sale subject where applicable to the prevailing law.
3M is trademark of the 3M company. SID is a trademark of Quante AG.
3M Telecommunications