Features:
Easy to operate・ it is more efficient than traditional methodsBlade can be replacedBlade material: super hard high carbon steelHandle material: ABSNote:
Keep out of reach of childrenDo not use it on dry or old hard woodHow to use:
Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to cut・ repeat this step to cut stem from the donor plant. Ensure that the groove is cut in the stock plantStep 2: Slide the donor stem into the groove of the stock plant・ matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size・ match on the side onlyStep 3: Place sterilizing material around the joint・ and bind with tape・ the sterilizing material will protect against bacteria and weather conditionsStep 4: Use the pruner to cut useless branches from the plantStep 5: The grafting tool with blades and the end of blades both can cut・ one blade can be used as two blades・ so you would have total six blades


0.3810 Package weight: 0.426 kg
Product Size(L x W x H): 21.00 x 9.50 x 4.00 cm / 8.27 x 3.74 x 1.57 inches
Package Size(L x W x H): 27.50 x 14.60 x 5.00 cm / 10.83 x 5.75 x 1.97 inches


Package Contents: 1 x Grafting Tool・ 3 x Blade











Product Safety Disclaimer:

We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys・ knives・ etc.)・ we recommend proper supervision as we cannot be held liable for misuse or accidents.