Item Descriptions:

size:

Width 15 × depth 15 × height 12 (cm)

Rear mirror collection case is easy to assemble.

Just fit in the groove with 3 piece configuration.

photo1

The case is made up of 3 pieces of pedestal, side plate, top panel.

Picture 2

Fit the side plate into the pedestal

Picture 3

It is completed by fitting the top plate.

Make the collection stand out with the rear mirror sheet.

Except for the one side face, the side plate of the case and the top plate have patterns and coloring

There is no frame because it is not foldable.

Since the side of one side is a 0.5 mm mirror sheet,

You can see the reflected items of the display.

(Table is the thickness of transparent part)

The corner is processed for folding.

(The photo on the left is an enlarged photograph of the corner portion of the side plate)

The side plate was made of vinyl chloride sheet manufactured by Sekisui Chemical Co., Ltd.

It is.

● At the time of delivery, a protective film is stretched on the mirror surface.

There is a case where the mirror coating peels off if you use nails.

(It is a trick to peel using your fingers' stomach.)

Since the film is not pasted on the reverse side, the appearance is opposite

I think that it will be the correct item in this state.

When not using, fold and clean up.

It is not troubled by the storage space.

When not in use it can be folded and stored as shown in the picture

Become.

Although we are standing at the book stand, we will collect

It is an image of the pay space.

At the required time, pairs

Make it and fold it and store it when not in use

I can.

When folded the thickness will be about 3 cm.

When delivered it will be delivered in a folded state like a photo.

Because it is an inlay type, the height of the actual inside dimension becomes shorter by about 1 cm.

The display dimensions are outside dimensions of the side plate (vinyl chloride sheet).

If the size is the same, the pedestal and the top plate will overlap,

Sheet thickness 0.35 mm to 0.5 mm so heavy

I think that it is better not to put on the pot.

We do not calculate load resistance etc.

Features:

• Rear mirror case is advanced grade of display case
• The display case fascinates the work more beautifully!
• The display case of the rear mirror highlights a wonderful work
• The display case is easy to assemble.
• Just fit into the groove in 3 piece configuration
• Top plate: styrene resin / side plate: vinyl chloride / bottom plate: styrene resin

Product information:

Shipping Weight: 195 g

Package Dimensions: 3.71 x 16.61 x 16.99 cm