Product Specifications :-

• Latest multipurpose LCD cable tester and tracker developed with more functions. It has 3 main functions: wire tracer, cable fault locator, length tester. It can test the length of network / coaxial / telephone / USB cables by the way of M-S, M-R, and OPEN. The test length can be 1500m as accuracy as 98%. It also capable to do line-to-line test, crosstalk and breaking point features fast and accurate, thus serve as a practical tool for low voltage system installation and technicians maintenance of communication circuits and comprehensive wiring circuits.

• It is used widely in the fields like telephone system, computer networks and other metal lead circuits. Easily find the target cable among various wires, such as network RJ-45 UTP 5E, 6E, telephone line, coaxial cable, USB cable and other metal lines.

• This is the ideal tool for telephone system, computer network and other fields that meets wide users' requirements.

• Measure length of network cable, coaxial cable, telephone cable and USB cable with three method (M-S, M-R and OPEN), capable to measure the cable at length of 1500m, and precision of measuring cable length and position of broken line is up to 98%

• Test open circuit, short circuit, cross connection, reverse connection, pairing connection and broken wire positioning for telephone cable, BNC cable and USB cable with M-S and M-R method visually display on LCD

• Perform crosstalk test on network cable for solving the potential problem of slow speed

• Quickly find the target wire or cable among the plenty of network cables, telephone cables, coaxial lines and other various kinds of wires

• Make accurate determination of open circuit position (left, right or middle)

• Perform cable tracking on exchanger or Router with power-on

• Low voltage prompt function is available in case of over low voltage on the main unit

• Featuring simple control, large screen display and open-and -shut test result

• Automatic delay power on-off and backlight function

• With Lighting lamp enables to use in a dark environment

• Remote identifier is not necessary to perform length measurement and pairing test

• Self-checking function and automatically compensate any change in battery capacity or ambient temperature

• Single chip computer software watchdog design and reliable operation

Product Features :-

• Display: Dot matrix 128 x 64 (effective visible area is 56 x 40mm)
• Testing and Detecting Cable types:
  • STP/UTP
  • 5E
  • 6E
  • network cable
  • Telephone cable
  • Coaxial cable
  • USB signal cable
  • Common metal wires connected with alligator clip
• Testing device interface:
  • Main unit: RJ45 (M)
    • RJ45 (S)
    • Loop interface
    • BNC connector
    • USB B-type female interface
  • Remote identifier:
    • RJ45
    • RJ11
    • BNC connector
    • USB A-type female interface
• Length measurement
  • Range: 1~1200m Calibration precision: 2% (±0.5m, or ±1.5 feet); (calibration; cable>10m)
  • measurement precision: 3%((±0.5m or ±1.5ft); (AMP, CAT5E, 6E cable material)
  • Display unit: meter, inch, yard
• Length calibration: User may use a cable at a known length to set a calibration coefficient. Calibration length is over 10m
• Line sequence and cable failure positioning: used for Lind Finding two-core cable or cable with over two cores
• Line finding function: used for Lind Finding two-core cable or cable with over two cores
• Operating Environment
  • Temperature: -10° ~ 60°C
  • Humidity: 20% ~ 70%
• Power Supply:
  • Master: 9V compound tandem cell
  • Receiver: 9V compound tandem cell
• Overall dimensions
• Main tester: 185 x 80 x 32mm
• Receiver: 218 x 46 x 29mm

Package Contents :-

• Main Tester
• Receiver
• Remote Identifier ( Wire Map )
• RJ-45 UTP Cable
• RJ-11 Telephone Cable
• Crocodile Clip
• Earphone
• 9V Battery
• Carrying Case
• User Manual