Studio : Cooleader

Publisher : Cooleader

Binding : Toy

Product Description

The operations to make it work as below:
Step 1-make sure the battery full charged(it will show red during charging,once the red light turn off, it means full charged already)
Step 2-connect the battery with the boat and switch on the boat.
Step 3-stand up the red wire signal receiver with the transparent tube.
Step 4-filled in AA batteries into the remote controller.
Step 5-put the boat in water and start pairing up the boat with remote controller.
Step 6-Followed all the steps, the boat still does not work?A:Place the boat in water.The boat only works in water.

Specification:
Material:ABS
Speed:15-20km/h
Charging time:2.5-3 hours
Playing time:10-15 minutes
Remote control distance:30-50m
Product dimension:29.2x11x9cm (11.5 x 4.3 x 3.5 inches)
Package dimension:44x16x13cm (17.3 x 6.3 x 5.1 inches)
Package Weight:600g (1.32 pounds)

Package included:
1 x RC Boat
1 x Remote Controller
1 x 4.8V 700 mAH Ni-CD Battery
1 x Charger Cable
1 x Transparent Tube
1 x User Manual

Note:
The boat should be put on the water first and then turn on the controller. Because the rc boat have Motor protective device,only works in water.
There is a wire at the end of the ship, which needs the transparent tube to make the wire stand up to receive the signal.
After receiving the rc boat, Please charge it firstly to ensure full charged,as low-volyage operation will burn and damage the motor.
0