JieJia 10ML， Czech Republic， good brand， is directly applied to the formula (bottle head can be directly applied)
Swimming crown 15ML， brand swimming crown for spray
Woo swim 10ML， brand woo tour for spray
(Different brands and capacity， the fluid way， the effect is basically the same)
【product description】
Any anti-fog goggles are not a permanent feature， regardless of dozens of dollars or hundreds of dollars of their anti-fog goggles function can only be held for 1 to 2 months， so swimmers is one of the necessary anti-fogging agent .
This product combines the latest nano-technology， anti-fog lens goggles enhance access to comprehensive， efficient fog， chemical testing by the National Center for testing， water resistance， colorless， odorless， non-toxic to the human eye and skin without any harm， Green.
Note: This does not apply only to anti-fog goggles， anti-fog goggles new purchases do not have to wait for the re-use of anti-fog.

Usage: After goggles goggles anti-fog coating failure to use the case only for goggles fogging. Make sure goggles are clean and free of wet， drops 1 to 2 drops spread evenly in the inner surface of the lens， dried into clean water for rinsing several times， to anti-fog (once).

【Instructions for use】

1. usually rinse after swimming goggles clean before use to ensure the goggles are clean， and there is no water on.
2. Before each go swimming first proper amount evenly sprayed anti-fog agent goggles inner surface， then put it aside to dry naturally.
3. After drying goggles to put clear water echoed several times， drying out the water can wear goggles， remember to wear goggles elastic medium， too tight or too loose will effect will be poor.
4. After a swim， remember to clean the goggles， natural dry.
5. Different anti-fog solution should be used separately， do not use it after mixing.
6. The anti-fogging agent is not long， it is impossible to always spray a fog， we are going before swimming to spray once every not too much， a bottle can be used dozens of times.

【Precautions】

1. In the lens surface coating.
2. Press the amount of time (at least 10 minutes before bathing， 1 to 2 drops)， or excessive use of temporary water before painting had no effect.
3. Apply with water small stream of water lenses; do not wipe it with other items.
4. room temperature， avoid direct sunlight or high temperatures.
5. Different anti-fogging agents can not be mixed