100% brand new and high quality
Straight connection don't need a USB cable.
Supports 22*30 mm/ 22*42 mm/22*60 mm/22*80 mm size M.2 NGFF SSD Drives.
High end quality product with sleek case design .
USB 3.0 interface. Plug and Play.
Compatible with Windows 2000/xp/Vista/7/8/mac os 7.0 and above.
Color:Blue/Golden/Black
Size:(L*W)11.20*2.00*0.80cm/4.41"*0.79"*0.31"
Quantity:1Set
About M.2 NGFF SSD interface standard:
1.Socket 2(Gen2 B+M key):there are SATA mode (such as THNSNH128G8NT/ THNSNH128GDNT/MZNTD256HAGM etc models of SSD) and PCI-E X2 mode (such as PX-AG128M6E PX-AG256M6E PX-AG512M6E SD6PP4M-128G SD6PP4M-256G HFS256GA6MND HFS512GA6MND HFS128GB9MND HFS256GB9MND HFS512GB9MND LGT-256B1P PT42 APP064G3FA-ATM etc models of SSD),it there are two gaps at the hard disk interface part.
2.Socket 3(Gen3 M key):PCI-E X4 mode,such as XP941 (MZHPU128HCGM MZHPU512HCGL MZHPU256HCGL),SM951 PCIE-AHCI (MZHPV128HDGM MZHPV256HDGL MZHPV512HDGL),SM951 PCIE-NVME ( MZVPV128HDGM MZVPV256HDGL MZVPV512HDGL) ,PM951 PCIE-NVME ( MZFLV128HCGR MZFLV256HCHP MZFLV512HCJH),950 PRO (MZVKV256 MZVKV512) SH2280S3 etc models of SSD.it there are one gap at the hard disk interface part.
Notice:
1: Please do not insert the USB cable into the chassis front USB ports if your computer is a desktop.Data lines connected to the computer's USB port after the home for desktop.
2: Please note that the query rated current of SSD,compute maximum power supply current is 1A of USB 3.0 interface,if the USB port can't provide enough current to the ssd,the computer can't identify or work can't well because the power supply can't meet requirements.
3: Don't to use USB extension and HUB,because it will lead to insufficient power supply.
4: Please cancel the hard disk password if your hard drive set a password in the original computer, The other computer doesn't recognize the hard disk if the password not cancel.
5: The SSD work will release heat,the shell fells very hot,this is normal.Heat is mainly produced by solid-state drives, if you remove the SSD, only connected hard disk box in USB port, it is cold,This product is made of metal material, it can fast heat conduction, so you touch it, feel the heat, if the product is made of plastic material, you touch it feel the temperature is low, but this will damage the your hard disk, because plastic can not be fast heat, it will lead to the internal temperature is very high.
6: Mac OS and some digital camera system use disk format can't compatible with Microsoft system,open the "my computer" can't see the ssd, please use the Disk Manager in Windows to delete the partitions or to create a new partition on the Hard Disk Drive.New hard drive can also such operations.
7: The product in the process of using don't move it and pay attention to prevent violent vibration.
8: This product performance is being improved unceasingly, like has the change, not separate informs even slightly.Pictures for reference only, subject to our available products.
USB port can't meet the SSD rated current of the fault phenomenon:
A: Unable to identify the SSD, but adapter card not to install SSD connected computers,the computer can identify new hardware.
B: Adapter card to connect the computer after constantly connected and disconnected.
C: Products to connect the computer, can read data of hard disk drive, but can't write data to the hard disk or can't format the hard disk partition or disconnect with computer when writing large files, as long as write data will disconnect or a computer without any response,this is because the usb port provided by the current slightly lower than the rated working current of the hard disk,Hard disk power consumption increased while writing data,then the current increase,but the USB port can't provide more current to meet the needs of hard disk,result in failure (Hard disk has bad sectors will have this phenomenon, please pay attention to distinguish).
We recommend you try to connect it to USB 2.0 port when yo









