1. Widely used in automobile headlights， front lights， taillights of various car models， motorcycle lights and other decorations2. Strongly adhesive ability， good ductility， strong tensile ability， perfectly wrap vehicle body bent and curve surface3. Resistant to high and low temperature， moisture resistant， not easy to degum4. Strong anti-corrosion ability Color: transparent (from transparent to purple)Material: PVCSize: about 12" x 24" (60 x 30cm)Installation instructions:1. Cut out appropriate size according to the size of car lights， in order to facilitate installation， 5cm longer would be better2. Clean the surface of the lights with a towel3. Spray a little bit water onto the surface of lights 4. Spray a little bit water to the expanded light film5. Straighten the film and stick it to the light properly6. Remove bubbles with a scraper to make the film neat and flat7. Can be blew dry or heated with a hair dryer. It has better effect if the film is pasted to a curved surface8. After heating， remove bubbles at the curved place with a scraper to make the film flat9. Use a knife to cut along the lines to remove film part outside the car lights10. Then， enjoy the fun of DIY car refitting Package:1 x Light film