Flight operation steps:

1， installed on the remote controller battery， the throttle lever remote controlon the left side of the push to a minimum.

2， the battery is arranged in the vehicle battery holder (note the batteryshould be installed in the battery holder's central position)， the power supply is switched on， then the vehicle on the flat ground， do not move the vehicle.

3， turn on the power switch controller， the remote controller reads theneutral point of frequency and gyroscope (remote will issue a "beep beep..."After a few "beep" sound， if the blue lights on aircraft often lit on thatfrequency is successful， if the blue light aircraft. The flashing on thatfrequency is not successful， the need to re frequency)， the frequency after the success can be began to control the aircraft. (Note: the aircraft is energized to open the remote power switch do not this time interval is toolong， preferably within 10 seconds. Too long have no way to frequency， toturn off all power to re open the frequency)

Note: Please slowly pushing the accelerator， don't rapid advance the throttle.