Specification:

Brand new

Length: 1.2 m

Shrinkage Ratio: 3:1

Tensile Strength ~ 14Mpa

Dielectric Strength ~ 20kv/mm

Minimum Shrinkage Temperature ~ +70 Degrees C

Color: black, as picture shows

Size:

G 3X 2.4mm(ID)x1.2m (Length)

G 3X 3.2mm(ID)x1.2m (Length)

G 3X 4.8mm(ID)x1.2m (Length)

G 3X 6.4mm(ID)x1.2m (Length)

G 3X 7.9mm(ID)x1.2m (Length)

G 3X 9.5mm8(ID)x1.2m (Length)

G 3X 12.7mm(ID)x1.2m (Length)

Features:

RoHS Compliant
High strength and resilience

Resistance to common fluids and solvents as well as high dielectric strength

Adhesive lined polyolefin heat shrink, with a 3:1 shrinkage rate this tube shrinks to 1/3 of its diameter when heated

It is suitable for a wide range of applications, including electrical insulation, strain relief, cable bonding, color-coding and identification

When heated the tube shrinks to 1/3 of its diameter and the adhesive lining melts and flows around the material being covered giving a permanent weatherproof bond

Due to the way heat shrink tube is manufactured it is often a little larger than its stated pre-shrunk size, however the tube will always shrink to 1/3 of the stated pre-shrunk size

Package included:

1 x 3:1 heat shrink tubing

Note:

Image is for illustrative purposes only

Please allow 2-3cm errors due to manual measurement

Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same