This car pedal is made of top quality Aluminum Alloy and environmental rubber， which is durable and non-slip. It will strengthen the foot pedal friction and reduce the slip effectively. Come and have a try.​Features：Made from high quality aluminum alloy and rubber， durable and practical.Fine workmanship and non-slip design.Easy installation and applicable for most models.Note: Please check your pedal size before your buying.Specifications:Item Type: Replacement PartsItem Name: Car Foot PedalsMaterial: Aluminum Alloy and RubberSize: 2 PCS: 7.3 * 8.1 * 0.5cm / 2.9 * 3.2 * 0.2in      1 PC: 5 * 11 * 0.5cm / 2.0 * 4.3 * 0.2inPedal Weight(3 pcs): 220g / 7.8ozPackage Weight: 285g / 10.1ozInstallation:Before Installation: Park the car safely; takes the key out of the ignition; apply parking brake.After Installation: Check the pedals’ mechanism periodically to insure that the pedal is secure and fits properly.For Bracket installation:1. Use the L shape brackets.2. Attach the L shape brackets onto the aluminum pedal. (Fig. A1)3. Align the aluminum pedal onto the top of the original pedal ， rotate the L brackets so they grab onto the backside of the original pedal ， and then firmly tighten the screws / nuts .(Fig. A2)For Permanent installation:1. Drill bit required (1/8” bit).(Drill bit not included)2. Pry off the rubber cover from the top of the original pedal ，(Fig.B1)3. Align the aluminum pedal onto the top of the original pedal ， drill a 1/8” hole for each mounting hole as needed to secure the pedal ， and then firmly tighten the screws / nuts.(Fig.B2)Warning: Do not operate vehicle barefoot or with slippers. Pedals have sharp edges that could cause foot injury.Package List:1 * Brake Pedal 1 * Accelerator Pedal1 * Foot Rest Pedal1 * Bag of Bolts and Nuts