The entire length of the bursts is probably about 14CM, width is probably about 10CM, the diameter of the bullet hole is roughly about 8CM
6 large holes around the entire length of about 14CM, width is probably about 10CM, the diameter of the bullet hole is roughly about 6CM
The entire length of the 24-hole is about 14CM, width is probably about 10CM, the diameter of each bullet hole probably about 2CM
6 small holes for the entire length of about 14CM, about the width of probably about 10CM, the diameter of the bullet hole is roughly about 5CM
Product Description: Shop sold a non-reflective stickers reflective stickers and stickers are carving class, the advantages of non-printing or printing class stickers (stickers carving class: 3 to 5 years will not fade, and digital printing and sticker printing class, after several months of wind rain the sun will fade, so now most of the riders are carving class choice sticker).
Owners mount the steps of:
1. Place the vehicle body position needs to be filled paste clean and loosen with a clean towel to dry.
Small stickers with paste method:
2. Direct the end of paper torn stickers, stickers affixed to install parts, evenness with scraper (or bank card).
Finally, the transfer film 3. Carefully remove sticker uppermost.