Item Descriptions:

Application:

Most 12V batteries can be tested.

The major battery standards JIS, SAE, EN, DIN and IEC are supported.

Benefits of BA 101:

1. Easy to use

2. The car engine can be battery tested on or off.

3. Accurate results in milliseconds

4. Battery life analysis

5. Analysis result: Good or replacement

6. Large LCD display easy to read

7. Test results based on JIS, EN, DIN, SAE, IEC standard

8. Language: English

9. Fast test - the volume (AH) is input and the battery status is displayed.

10. Vehicle cranking system test - cranking time, voltage, status

11. Vehicle charging system test - load voltage, no load voltage, ripple condition, charging system condition

12. Save test results, print function

BA 101 Benefit

1. Conductance is directly related to battery capacity.

2. The passive test method is optimistic.

In case

3. Do not discharge the battery or discharge it.

4. You can test the condition of the discharged battery.

5. Matching and overlapping results.

6. Display the condition of the battery specially.

7. Check the charging of the alternator and the cranking condition of the starter.

It is maintenance free and requires no built-in battery.

8. Power up when connecting to the battery post during the test.

BA101 Function:

Test Result: Good or Replace

Capacity - CCA (Cold Cranking Amps), DIN, EN and IEC information are related to battery evaluation.

Internal resistance value (m)

Percentage of service life (%)

Crank system

Charging system

Operation parameters:

System voltage: 12V

Input voltage range: 9V to 15V

Power requirement: No internal battery is required.

If you connect while testing, the power turns on.

Features:

• Compact and compact design, fast scan speed, you can display test results directly.
• Beginners can also analyze the 12-volt battery healthily.
• All information about the battery such as voltage, charge, cranking power, and battery level (Ohm resistance) are displayed.
• It is fast and accurate.
• Very wide test range (100-2000 CCA), more accurate compared to competitors.
• The test results are based on JIS, EN, DIN, SAE, CCA, BCI, GB, CA, MCA, IEC standards.
• Inspect the alternator charging and cranking conditions of the starter.
• It is also possible to test the vehicle charging system such as load voltage, no load voltage, ripple condition, charging system condition.
• BA101 Battery tester is equipped with a large LCD display with white backlight and contrast control and displays the test result directly.
• There is no need for an internal battery and you can get power directly from the 12V battery.
• It is equipped with 3.0 feet long cable and is made of a very thick and flexible insulator, much safer than the ones sold on the market.
• There are four buttons on BA 101, and there are up / down buttons to scroll through the menu.
• By using the [Enter and Exit] button you can go back to the navigation and menu.
• I will guarantee for 2 years.
• I support Japanese, English, Chinese and others.

Product information:

Shipping Weight: 340 g

Package Dimensions: 5.00 x 16.99 x 22.91 cm