注意:此款转接卡仅适用于B-key或B/M-key的无线网卡接口,不适用于B-key或B/M-key的SSD接口

注意: 此款转接卡只可以插NGFF网卡,不可以插SSD
此款为无线网卡转接卡而已,不是3G无线上网卡,单插SIM卡时是不可以上网的,要同时插上带3G功能WIFI网卡才支持上网.
一、描述:
NGFF(M.2) Key B USB转接卡是专为台式机/笔记本电脑设计,将无线M.2卡模块转化为USB端口。
使用时先将M.2卡模块(Socket 2 SSIC-base WWAN)如GSM、HSPA(3.5G)、GPS、LTE卡到这个转接卡适配器,然后将此卡插入到电脑的USB端口。
二、特点:
1、支持USB接口的M.2卡(Socket 2 SSIC-base WWAN),如2G GSM, GPRS, 3G,CDMA, WLAN,WWLAN, HSPA MODEM , GPS, 4G WiMAX, LTE,迷你卡插入到台式机或笔记本电脑,例如华为MU736 / ME936 / ME906V,Sierra Wireless Airprime EM7305等模块。
2、安装方便、不需要安装驱动,但是须确保M.2卡模块已经安装了软件驱动程序。
3、支持30 * 42类型的NGFF(M.2)Key B卡。
4、支持6位/ 8位SIM卡连接器。
5、不需要外加电源。
6、支持热插拔。
7、支持任何操作系统,比如Windows, WinCE, Linux & iMAC等等。
三、包装内容:
1 、NGFF(M.2) Key B转SIM 8PIN转接卡------1片
2、螺丝刀------1把
3、M2螺丝------3颗
NGFF(M.2) to USB Adapter With SIM card Slot for WWAN/LTE/4G Module
Description
The NGFF(M.2) Key B to USB adapter is designed for desktop/Laptop PCs that convert wireless M.2 Card to USB port.
You can insert your M.2 card (Socket 2 SSIC-base WWAN) such as GSM, HSPA(3.5G), GPS, LTE cards to this adapter then plug to USB port
Features:
Supports USB interface of M.2 Cards (Socket 2 SSIC-base WWAN) such as 2G GSM, GPRS, 3G,CDMA, WLAN,WWLAN, HSPA MODEM , GPS, 4G WiMAX, LTE, Mini Card to desktop/Laptop PC, such as, HUAWEI MU736/ME936/ME906V, Sierra Wireless Airprime EM7305
Easy installation & no driver required, but make sure you have installed the software drivers for your M.2 card.
Support 30*42 type NGFF(M.2) Key B card
Support SIM 6pin/8pin card connector.
No additional power required
Supports Plug & Play and Hot-Swapping
. Supports any OS, like Windows, WinCE, Linux & iMAC etc
Package Content:
1x NGFF(M.2) to USB Adapter
1x Screw Driver
2x M2 Screw
Note: This adapter is only applicable to the B-key or B / M-key wireless card interface, not applicable to the B-key or B / M-key SSD interface
Note: This adapter can only be inserted NGFF card adapter, you can not plug SSD
This is a wireless card adapter only, not a 3G wireless network card, single-SIM card is not available on the Internet, to be inserted at the same time with 3G-enabled WIFI network card to support the Internet.
First, the description:
The NGFF (M.2) Key B USB Adapter is designed for desktop / laptop computers and converts wireless M.2 card modules into USB ports.
When using, connect the M.2 card module (Socket 2 SSIC-base WWAN) such as GSM, HSPA (3.5G), GPS, LTE card to this adapter and then insert this card into the USB port of the computer.
Second, characteristics:
1. Socket 2 SSIC-base WWAN, such as 2G GSM, GPRS, 3G, CDMA, WLAN, WWLAN, HSPA MODEM, GPS, 4G WiMAX, LTE, Mini Card inserted into the desktop or Laptops, such as Huawei MU736 / ME936 / ME906V, Sierra Wireless Airprime EM7305 and other modules.
2, easy to install, do not need to install the driver, but be sure to M.2 card module has a software driver installed.
3, support 30 * 42 type NGFF (M.2) Key B card.
4, support 6/8 SIM card connector.
5, do not need extra power.
6, support hot swap.
7, support for any operating system, such as Windows, WinCE, Linux & iMAC and so on.
Third, the packaging content:
1, NGFF (M.2) Key B switch SIM 8PIN adapter ------ 1 piece
2, screwdriver ------ 1 put
3, M2 screws ------ 3
NGFF (M.2) to USB Adapter With SIM card Slot for WWAN / LTE / 4G Module
Description
The NGFF (M.2) Key B to USB adapter is designed for desktop / Laptop PCs that convert wireless M.2 Card to USB port.
You can insert your M.2 card (Socket 2 SSIC-base WWAN) such as GSM, HSPA (3.5G), GPS, LTE cards to this adapter then plug to USB port
Features:
Supports USB interface of M.2 Cards (Socket 2 SSIC-base WWAN) such as 2G GSM, GPRS, 3G, CDMA, WLAN, WWLAN, HSPA MODEM, GPS, 4G WiMAX, LTE, Mini Card to desktop / as, HUAWEI MU736 / ME936 / ME906V, Sierra Wireless Airprime EM7305
Easy installation & no driver required, but make sure you have installed the software drivers for your M.2 card.
Support 30 * 42 type NGFF (M.2) Key B card
Support SIM 6pin / 8pin card connector.
No additional power required
Supports Plug & Play and Hot-Swapping
Supports any OS, like Windows, WinCE, Linux & iMAC etc
Package Content:
1x NGFF (M.2) to USB Adapter
1x Screw Driver
2x M2 Screw



