Item Descriptions:

A stand with a stand that can stand on its own and is convenient for use in places where there is no taking space.

<Product specification>

■ Color: Black + Blue

■ Weight: about 550 g (one leg portion / about 310 g, stand portion / about 240 g)

■ Maximum height of one leg: 1650 mm Storage size: 450 mm

■ Maximum leg diameter 25cm Minimum leg diameter 13cm

■ Three leg support size: Height 75 cm Single leg length: 110 mm

■ Number of stretching steps: 5 steps

■ Load capacity: 5 kg

■ Single Camera Mounting Screw: 1 / 4-20 UNC, 3 / 8-16 UNC

Producing countries ■: China

■ Warranty period: Initial failure only

Human engineering design, horizontal 3D anti-slip load platform diameter about 57 mm

Monopod featuring:

● It is convenient for shooting in places where there is no space to stand a tripod, with a stand.

● The stand can be fixed to the monopod body and can be made independent.

Please note that as long as you lengthen, the stability will be lower so that it will not collapse.

● Compared with a general tripod, the range where the leg spreads is small, so it can be used in a space-saving manner.

● The height can be adjusted from a minimum of 450 to a maximum of 1650 mm (when using the stand), and can be adjusted frequently with five stretches.

Angular fine adjustment possible around 20 degrees left and right with three foot support stand!

Self-supporting stand

● If you use the stand close, you can use it as a monopod.

● Remove only the stand part, it can also be used as a small tripod for desktop etc.

● The part with the urethane is hard to slip, and falls when you wrap the strap around your wrist.

● The camera mounting screws correspond to 2 types of 1 / 4-20 UNC, 3 / 8-16 UNC.

It corresponds to a minimum of 450 mm up to 1650 mm, and it can be made compact when folded!

It uses eight different densities of carbon, and it has better heat resistance and corrosion resistance.

Convenient to carry

It is convenient to carry with a special case.

Packaging:

1 * monopod

1 * Three pair support

1 * Strap

1 * Monopod Bag

Features:

• Please enter model number Confirm this is compatible:
• It is a compact 5-stage single leg made of carbon with a self-sustainable stand.
• It can support from 450 mm at the minimum to 1650 mm at the maximum, and the camera mounting screw corresponds to 1 / 4-20 UNC, 3 / 8-16 UNC.
• You can also use it as a small tripod for desktop etc. by removing only the stand part.
• Weight: Approximately 550 g (one leg / about 310 g, stand part / about 240 g) Maximum leg diameter 25 cm Minimum leg diameter 13 cm Three leg Support size: Height 75 cm Single leg Length: 110 mm
• It is rotatable about 20 degrees left and right, it is convenient for flexible shooting.
• Adopt nut system excellent in fixing force for expansion locking system

Product information:

Shipping Weight: 548 g

Package Dimensions: 8.61 x 8.61 x 54.00 cm