Work with T-Mobile,ATT 700MHz 4G Lte Band 12/17 Frequency range:728-746MHz/698-716MHz
The Signal Booster would improves the voice quality and faster 4G Lte in your house and office
Could covers about 2000sq.ft in your home,office,villa,garage,basement and so on
The installation requires no technical experience,it is very easy to install
FCC Certificate

Technical Details

Product Details

Package Dimensions
Width : 8.66 inch
Height : 6.3 inch
Length : 12.99 inch

Shipping Weight: 0 ounce (View shipping rates and policies)

ASIN : B06XHC2MP2

Product Description

Note:
1.The cell phone signal repeater booster could only work with T-Mobile,ATT 700MHz 4G Lte Band 12/17
2.It is better to determine the exact in different location until the highest signal strength is received on your phone(most amount of bars).Once you ascertain the best location then permanently mount the outdoor antenna.Keep the distance between the outdoor antenna and indoor antenna should be above 22ft and make sure a proper amount of physical separation between outdoor antenna and indoor antenna.These things are absolutely critical for this booster to work.

Operation Frequency:Band 12
Uplink:698MHz-716MHz,Downlink:728MHz-746MHz
Emission Designator:LTE(G7D)
AGC LEVEL:Uplink:-45.00 Downlink:-56.00
Max.Antenna Gain:Uplink:8.1dBi Downlink:6.6dBi
FCC Classification:B2W/Wideband Consumer Booster(CMRS)

Packing:
signal repeater booster
Power Adapter
Indoor Whip Antenna
Outdoor LDPA Antenna
32ft OD7.5 coaxial cable
Mounting Screw Kit
English User Manual

Installation Guide:
1.Tightly connect the 32ft coaxial cable to the Outdoor LDPA Antenna
2.Check and find a place where your cell phone could receive the best signal outside your house,then mount the Outdoor LDPA Antenna and keep the Outdoor LDPA Antenna towards the cell phone signal tower
3.Mount the signal booster device somewhere inside the house,the signal booster should be mounted in a place where is near from the power socket,and have good ventilation.
4.Tightly connect the 32ft coaxial cable to the the OUTDOOR port of the signal booster.
5.Tightly connect the Indoor Whip Antenna to the INDOOR port of the signal booster