An innovatively formulated, solvent-free engine interior cleaner manufactured on the basis of low viscosity detergents. The cleaner reliably ensures full dispersion and removal of dirt deposits in the engine oil system. Contains an additive for lubrication of components during cleaning.
Properties:
- VOC (solvent)-free formulation
- Contains low viscosity detergents for excellent cleaning results
- Reliably removes oil sludge deposits(black sludge) from the engine oil system
- Protects against engine damage from blocked up oil channels and holes
- Contains an additive for lubrication of components during cleaning
- A chlorine, phosphate, nitrate and heavy-metal-free formulation
- Removal possible over the old oil
Area of use:
- If black sludge is suspected
- With piston ring compression loss
- For hydraulic valve rattle
Uses:
Add one can of the product to engine at operating temperature before changing oil. Ensure oil level is at least at minimum level. Allow engine to run for maximum 30 minutes with idling rpm. Perform oil and filter change immediately! After cleaning, fill up with fresh oil and allow the engine to run for some minutes.
Special note:
1 can is sufficient for 3-6 litres of oil.