8078

Dry Graphite Lubricant
Aerosol Spray Can (340g)

Description:
This multipurpose lubricant is used throughout the world for extreme temperature lubrication requirements. Dry Graphite Lubricant coats surfaces with a super slippery, long lasting protective film.

Benefits:
This product is clean, dry, non-oily, non-staining, and can be used where petroleum products are avoided. Highly effective in a wide temperature range of -100°F to 1000°F (-73°C to 538°C). Prevents the build-up of dirt and grime.

Application:
Use on bearings, locks, oven parts, preassembled moving parts, sliding windows and doors. Use as a parting compound on dies, sand cores, match plates, drawing extrusions, die casting, and pewter mouldings. Also use as a coating on conductive material, or sealant.

Directions:
Align spray head with black mark on valve rim to ensure complete evacuation. Before spraying, shake can vigorously for at least 1 minute after agitator ball is heard and intermittently thereafter. Surfaces must be dry and free of dirt, oil, and wax. For best results product should be used at temperatures between 60° and 80°F (16° and 27°C). Hold can 8 to 10 inches from surface. Only a thin film is needed. Allow one minute to dry. Do not use on electrical equipment or machinery while in operation