From USA or UK ★USA electronic product(110v) requires adapter plug or Down transformer.★ Before purchase check please.

Pair of Bike Pedals Aluminum Alloy Bearings Pedals









Product Description


How to fit your pedals:
cleaning your crank before fitting to help remove any grit that is in the threads
Find the Right Hand pedal by looking for the R on the end of the axle
To prevent the pedal being difficult to remove in the future, put a little grease on the pedal thread. About half a pea size is all you need
With the Right Hand pedal in your right hand, gently offer up the pedal thread to the RIGHT HAND crank thread (the side with the cogs on) and slowly pedal the crank backwards
The pedal should begin to screw into the crank
Once tightened up by hand, tighten with an open ended 15mm spanner
Repeat with the left hand side,due to the reverse thread on the left pedal you still pedal the crank backwards to tighten the pedal

Feature

Material: Aluminum Alloy, Excellent Performance, Durable
Size : 12x10x2.5cm
9/16-inch Axle, each pedal axle has a letter (R for RIGHT HAND pedal and L for LEFT HAND pedal)
These pedals fit the majority of adult mountain bikes
Comes with reflectors on each side
Brand : Antoop
MPN(PartNumber) : JTB01
EAN : 0766330492716
Package Dimensions(LxWxH) : 14x11x6cm ; 0 g
From USA or UK / ★PLEASE NOTE: USE ONLY WITH PROPER OUTLET ADAPTORS AND VOLTAGE CONVERTERS FOR YOUR AREA. WITHOUT THE PROPER ADAPTOR AND VOLTAGE CONVERTER, PLUGGING THIS PRODUCT INTO AN OUTLET WITH VOLTAGE IN EXCESS OF 110-120 VOLTS MAY RESULT IN FIRE AND/OR INJURY.