The part of the lid

The capacity also enters firmly. I use it everyday. What you think about using it every day is that it is hard to wash the lid and spout part, it is easy to clean. Also, if you open it vigorously, the sliding part of the lid may come off. Other than that is good! I also have supermarket, so I think that once you see it and buy it.

Basically no problem.

Easy to hold, easy to pour and also easy. Even if it is lying down, it does not seem to leak water, and it is basically used conveniently. I thought that it would be nice if the pour spout was a little larger and pour it in one stroke. Also, there are many parts, depending on what you put in, dirt may become concerned.

Both operability and airtightness are good

Purchased for ice tea. Previously I turned this side of the spout and fitted to the front. When shifting slightly, it leaked from the side of Verobero and I was irritated, so I chose this sliding type spout type. Is the correct answer. It is handy because you can also put hot items. Since the mouth will always come in properly properly in about 2 lids, you can use it without stress.

Comparison with K-1297NB

Compare with K-1297NB of almost same spec. K-1297NB has high rigidity, it is a solid construction but many parts, washing of the tank part was troublesome due to the structure. Although it seems that the rigidity seems to be low overall because it is thin construction, it is very easy to wash and enter the tank easily. I do not need the force to the part where it can be opened and closed with one hand and the lock is performed firmly. However, since the screwing of the tank part and the cap part is steplessness, if it tightens, it will be displaced by 90 degrees and you can not lay it horizontally. I am screwing back a bit, but I'm worried about leakage.

Convenient non-leaky

The purchase of this product is the fourth time convenient. I usually drop it and buy plastic and buy it. Compared to other products, water leakage is small even if placed horizontally, it is convenient to consider the cracking ease of plastic because the lid slide is easy to use. As a discontent point it is difficult for the steering wheel and the main body to flatten well when it is closed (although it is still more likely that the water does not leak, it is very good) Is it better to see the straight type than the trapezoid type? Although it is a part, it is closed to the high convenience.

It became easier to open than the previous one?

It was a type together with the cold water bottle I bought four to five years ago, but it was easier to open with one hand than my former one, so I could purchase it. The price was cheaper than the other mass retailers.

I'm glad I bought it!

Other manufacturers that I used to use were often leaked when pouring, but it was nice to purchase this without wasting it and to wash easily (* '﹀ `*)