Orignal JYE Tech UART-USB Converter Module TTL-USB Converter Board CP2102 With Unsoldered USB Socket

Feature:

Converts the UART signal into a USB signal to make the USB becomes a virtual serial port、 especially for SCM and PC connection.
It should generally microcontroller serial port is TTL level、 so that the converter is also known as TTL-USB converter.

The converter uses CP2102 realize、 when used need to install the CP2102 driver on the PC、 please download the driver from here:http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx





VBUS: USB power input、 connect the USB terminal of the power supply hole VBUS.
D-: Signal D-、 connect the USB terminal D-.
D +: Signal D+、 connect the USB terminal D+.
GND: Common ground、 connect the ground terminal.
TXD: Signal output、 receives the signal from the USB port、 commonly connected microcontroller RXD terminal.
RXD: Signal input、 sent the input signal to the USB port、 usually connected to the microcontroller on TXD terminal.

Working steps:

1、 The microcontroller through TXD、 RXD and UART-USB converter transmission signals、 and UART-USB signal is converted to USB with D + and D-.
2、 Connecte the PC with the USB cable、 in turn establish a connection to the microcontroller and the PC.

Package includes:

1 x UART-USB Converter