Imports of reflective material - high quality in car

Reflective material shop all use imported reflecting film. Lasting color gorgeous. During the day， bright colors， the night under the lights more dazzling.

Note: the reflective material for the white under the natural light color than white， but a bitlike a silver grey color， only in the light reflection would turn into pure bright white.

 产品参数：

 [Methods]

Small car with the transparent film installation method (dry paste method):

Tools: large car cloth， scraper or credit card transparent film installation method (wet sticking method):

Tools: cloth， water glass， scraper or credit card

1， clean body， keep dry.

2， determine the need to place. In general， slowly pastes， side with the tools to scrape，and propose the paper.

3， if the graph is not， can also make the transparent film and label all tear paste. But be careful， don't happen adhesion.

4， after a good stick， and then repeatedly scraping pressure several times. Remove the transparent film.

5， in the doors and sewn with knife knife， inward package fu.

6， don't let the car and the car body has any separation or protuberance.

A large car with the transparent film installation method (wet sticking method):

Tools: cloth， water glass， scraper or credit card

1， clean body， sprinkle water -- to reduce viscosity， easy to adjust the position of the stickerwill be posted on the body.

2， to determine a good car stickers to place. Slowly the side stick， aside lightly with tools to scrape， and propose the paper.

3， meet the door handle or rubbing strips according to the situation of the material cut andinto the.

4， appropriate adjustments， the graphics general position is correct， forced repeatedscrape water and bubble. Remove the transparent film.

5， in the doors and sewn with knife knife， inward packet paste.

6， don't let the car stickers and body have any separation or protuberance.

7， try to let the car sticker in the water dry， the conditions can be moderate heating and drying. According to the weather condition， one or two days later after the car wash.

[installation]

1， clean the wheel hub， will be prepared to place to wipe clean.

2， tear off a reflective stickers， affixed along the wheel edge slowly， do not have any fold.

3， the second reflective stickers starting position should take in the end of Article 1， about 5mm.

4， according to the steps above the rest of the reflective stickers affixed. Be accomplished!

[] how to remove

Gently blows with a nail sticker edge， then the entire tear， will not leave marks will notdamage the car paint. If winter cold not up corner， hair dryer available will tape proper heating， melting can be easily removed after soft rubber.

[note]

1， in a former decided to decorate the car week not waxing， wax will let sticker adhesive is not strong; do not wash the car within three days after the car paste， not in the rainy days，so the effect will be not good oh!

2， such as stickers to put a crack in the door or other activities， also need not worry， after a good stick with a sharp knife cut.

3 non self luminous， reflective material! When the light irradiation to be reflected lightreflecting at night