使用说明书：<br>An instruction manual：<br>1、时间日期设置<br>1, time and date settings<br>★ 上电后显示正常状态。按SET键进入时间、日期的设置，并以下 列顺序分别设置<br>According to the normal state after power on. Press the SET key to enter the setting of time and date, and set them in the following order<br>小时、分钟、年、月、日、星期等，通过UP/DOWN键配合来完成设置。<br>Hours, minutes, year, month, day, week, etc., through the UP/DOWN key to complete the set.<br>★ 设 置范围：时为1-12或0-23、分为0-59，年为2000-2099、月为1-12、日为1-31<br>* set range: for 1-12 or 0-23, divided into 0-59, 2000-2099, 1-12 for years, for 1-31 months<br>在日期设置的同时 ，星期由MON至SUN相应的自动改变.<br>At the same time as the date is set, the SUN is automatically changed from MON to<br>★ 在设置状态，也可按AL键或无按键1分钟退出设置，并显 示当前所设置的时间。<br>You can also set up the state, press the AL key or key 1 minutes to exit the setup, and display the current time set.<br>★ 在正常状态，按UP键进行12和24小时转换。<br>It is in the normal state, 12 and 24 hours into press UP.<br>2、闹钟和贪睡设置<br>2, set the alarm clock and sleep<br>★ 在正常状态，按AL键一次进入闹钟模式。<br>It is in the normal state, press the AL button once to enter the alarm mode.<br>★ 在闹钟状态，按SET键进入闹铃设定状态， 以下列顺序分别设置小时、分钟、贪睡<br>B on the alarm status, press the SET key to enter the alarm set, are respectively arranged in the following order, minutes, hours of sleep<br>音乐，通过UP/DOWN键配合来完成其设置。<br>Music, through the UP/DOWN key to complete its settings.<br>★ 在设置 状态，如果无按键1分钟或按MODE键退出设置，并显示当前所设置的时间。<br>I set up the state, if there is no button for 1 minutes or press the MODE key to exit the setup, and display the current time set.<br>★ 在闹钟状态，通过 UP键开启闹铃样的标志，按第二次UP键开启贪睡功能。<br>B on the alarm status, sign by UP key to open the alarm, press the UP button second times open snooze function.<br>★ 当闹钟到达设定时间，响闹1分钟；当 贪睡时间到达响闹，按SET键取消响闹<br>* when the alarm clock reaches the set time, the alarm for 1 minutes; when the time arrived at the snooze alarm, press SET to cancel the alarm<br>★ 贪睡的间隔延续时间范围设定：1-60分钟。<br>You snooze interval time setting range: 1-60 minutes.<br>★ 当 闹铃及贪睡的标志未开启时，即闹铃和贪睡同时关闭，只有在闹铃标志开启时，重按UP，贪睡功能才 有效。<br>* when the alarm and snooze sign is not enabled, the alarm snooze and closed at the same time, only when the alarm sign is opened, according to UP, a snooze function is valid.<br>3、温度转换<br>3, temperature conversion<br>★ 在正常状态，按°C/°F键可以进行摄氏/华氏温度间的相互转换。<br>It is in the normal state, switching between Celsius / Fahrenheit temperature to C/ degrees F key.