Form Color	Brass
Model	VZJR6428
Material	Plastic、 metal
Quantity	1 Set
Compatible Model	H250
Packing List	1 x 3 in 1 galvanometer board 1 x 14AWG red silicone cord(150mm) 1 x 14AWG black silicone cord(150mm) 1 x XT60 battery connector plug(1 pair) 1 x 6PIN power supply signal line(1 set)(150mm) 1 x Heat Shrink Tubing(1segment)(80mm)

Features:
Integration of galvanometer、UBEC、sub panels as a function of APM current!#!amp!*!voltage sensors
Compatible with APM2.5/APM2.6/APM2.8/PX4 Flight Control
PCB using double-sided 3 times copper immersion gold process、excessive current is stable and reliable
The onboard 5.3V / 3A switching power supply UBEC
Current and voltage sampling circuit compatible 3DR galvanometer、 without calibration、 you can connect flight control and simple settings then it can be used
Specifications:
Item Name:APM Current!#!amp!*!Voltage Sensors
Voltage Input:2S-6S
Voltage Sampling: 10/1
Output sub-line: 6-way
BEC Output: 5.3V / 3A (PWM switching)
Installation pitch: 45mm x 45mm
External dimensions: 50mm x 50mm
Usage:for APM2.5/APM2.6/APM2.8/PX4 Flight Control
Using methods:
Board marked B +、 B- is to connect the battery input terminal、the output terminal is six pairs of pads arranged side by side、respectively + - as a standard for welding ESC power lines.
Make sure that the correct welding.
Galvanometer connect with APM through a 6PIN signal cable、 APM terminal please insert labeled PMs 6 hole socket、and unplug the JP1 jumper cap. Prevent galvanometer power supply and power transfer in parallel which is not allowed、 unless your ESC does not have BEC output. Special Note: Compatible with standard version APM、 please pay attention to the line sequence of APM and distributor wiring board. After connecting、set the current!#!amp!*!voltage sensors in the following photo in the MP then it can be used. Dimensions: 2.36 in x 1.97 in x 0.31 in (6.0 cm x 5.0 cm x 0.8 cm)
Weight: 0.92 oz (26 g)