The cell phone signal booster repeater can solve your poor signal reception problem inside your house,so you can enjoy clearer phone call or faster mobile date inside your house. Get fewer dropped calls, better voice quality

Technical Details

Product Details

Package Dimensions
Width : 7.87 inch
Height : 6.3 inch
Length : 12.99 inch

Shipping Weight: 0 ounce (View shipping rates and policies)

ASIN : B06W9NLKDW

Product Description

NOTE :

1. Before bid, please make sure your mobile frequency is 850mhz Band5 in your area.
2. This cell phone signal booster can only make the weak signal stronger , it can''t creat signal , that''s means it won''t give you any help in an area where there is no signal at all .
3.You should make sure get 2- 3 bars in the outside bofore use this item .

Specification :

Operation Frequency:824-849MHz(Uplink),869-894(Downlink)
Emission Designator:CDMA(F9W),WCDMA(F9W)
AGC LEVEL:Uplink:-44.00 Downlink:-56.00
Gain:Uplink:60±2dB Downlink:62±2dB
I/O Port:N-Female on Both ends
OutputPower:Uplink:16.63dBm Downlink:7.58dBm
Max.Antenna Gain:Uplink:7.9dBi Downlink:6.6dBi
Power Supply:DC 5V from adapter
FCC Classification:B2W/Wideband Consumer Booster(CMRS)
Guarantee:FCC authentication certificate
30days money-back guarantee
one year manufacturer''s warranty

Package Contents:

* 850MHZ Cell Phone Signal Booster
* Indoor whip Antenna
* Outdoor LPDA Directional Antenna With 32feet Cable
* Screws for Mounting
* AC Adapter
* English User Manual

Installation Guide:

1.Check and find a place where your cell phone can receive the best signal outside your house, usually on the roof, or similiar high places, then fix the outdoor antenna there, and the outdoor antenna should be pointing to the cell tower''s direction. (The outdoor antenna should not be higher than the lightning rod on top of the building.)

2.Fix the repeater device somewhere inside the house, the repeater should be fixed in a place where is near from the power socket, and have good ventilation.

3. Runs the cable on the outdoor antenna into the house, and connect the antenna cable connector on the OUTDOOR port of the repeater tightly.

4.Tightly connect the indoor panel antenna on the INDOOR port of the repeater.