Buyers please note: the installation of the battery must pay attention to the installation of positive and negative, two battery installation is positive and negative exactly the opposite, (both inside and outside the battery positive and negative mark)

Baby introduction: the transmitter on the side of the baby, the receiver with the guardian away when the baby cry will trigger the receiver to cry out to remind the guardianship distance 80-100 meters transmitter and receiver are using two "AAA" battery



Description:
1. This product is mainly used for baby sleep monitoring, for a sound sensor trigger, to remind the new product. Products are sound sensor transmitter (Transmitter) and receiver sound receiver (Receiver) in two parts. If the baby woke up, the baby's proximity sensor will send a signal, the receiver (Receiver) received a signal will be issued by the product default baby cry, to remind the guardian at this time the baby may wake up Or other circumstances. The two parts are wireless transmission, to avoid the inconvenience of the cable, the baby guardian is a good helper.
2. Before using the two products into the two batteries on the 7th and cover the use of the two products next to the toggle switch all the "OFF" to open the product, (toggle sensor (Receiver) button to "1" For low sensitivity, high sensitivity at "2". Toggle the "Receiver" button to "1" for the small volume, "2" for the high volume).
3. When the product is in normal operation, the Receiver indicator will flash for 3 seconds, indicating that the Receiver is receiving a range from the transmitter that receives the sound sensor. [Note: The sound sensor The transmitter should be placed near the place where the baby sleeps. If the Receiver's indicator can not flash at 3 seconds, it indicates that the Receiver leaves the distance of the received signal, and the Receiver should change the position.