Quality 1.2mm Wall thickness, high-endurance grade-304 stainless steel Handle Grip , Solid grade-304 Stainless Steel mounting standoffs offer a 4.6mm/0.18'' efficient deepest occlusal length with 4 SUS304 hexagon socket set screws. TOGU TG-6012 series SUS 304 push pull handles feature a distinctive and durable structure with strong resistance to rust, corrosion, and deformation for an everlasting lifespan without looseness, let every of your dollar have the highest cost performance.
Finished in perfect textured brushed stainless steel with chamfered edges to avoid any unexpected accidental injury, TOGU TG-6012 36''/900mm size provides a Grip/Handle length of 900mm /35.433 inches, hole to hole distance 760mm/29.921 inches, Cross-Section Diameter 32mm/1.26 inches, with a pair of 95mm/3.74'' stainless steel 304 fastening hex socket screws to fit most doors up to 75mm/2.95'' thickness.
You don''t need to spend even one more penny to buy any more tools for its installation, since two sizes installation hexagon wrenches as well as a complete backup accessory pack are offered inside with a clear instruction manual to finish the whole installation effortlessly.
Each purchase of TOGU push/pull handles comes as a PAIR of door pulls for the inside and outside of a single door, or you can use it as 2 single-sided handles for 2 different doors. If you want to install back-to-back handles for double doors, 2 pairs are required.
With a commercial comfortable hand feeling and elegant, clean design, TOGU TG-6012 door handles can be used as Entry/Entrance door handles, wood or glass door pulls, interior/exterior entrance/entry door pull handles, and barn sliding door knobs/handles to coordinate all modern decorations. Experience TOGU industrial commercial quality and create your clean, modern home decoration with TOGU manufacturer wholesaling price!

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 8 inch
Height : 2 inch
Length : 36 inch

Item Weight: 0 ounce (View shipping rates and policies)
Shipping Weight: 2.2 pounds (View shipping rates and policies)

ASIN : B00X0KEKKS

Product Description

Brand: TOGUHandle Material:1.2mm Wall Thickness Commercial Grade-304 Stainless Steel Mounting Outstandings and Fastening Screws Material:100% Solid German Standard Commercial Grade-304 which will result in a very long durability and usage. Total length: 900mm / 35.433 inches Center-to-Center Mounting Distance:760mm/29.921 inches Cross-Section Diameter:32mm/1.26 inchesFinish:Full Brushed Stainless SteelDoor Type: Mountable on all types of doors including but not limited to glass and wooden doors, works up to 2.36 inches door thickness. Note: Each purchase comes as a PAIR of door pulls for inside and outside of a single door. For double doors, 2 pairs are required.Steps for Installation: Drill and create two end to end holes between 0.315 - 0.600 inches (0.375 is recommended) on the door with a Center-to-Center Mounting Distance. Use the Hexagonal Allen wrench to lose the hex socket set screws in the top and bottom pull connection base, remove apart the inner side and outer side of the door pulls. Put the inner side pull handle and outer side pull handle aligning at each other and tighten the 4 pieces of the hex socket set screws in the top and bottom pull connection base. This completes the installation process. Description : Limited Lifetime Replacement