Item Descriptions:

size:

13

Luxury band pin removal

(1)

Use the scale of the platform to align with the needle.

(2)

Place the watch strap in the middle of the tool,

(3)

Swing clockwise to remove strap pins.

(Note: The pin of the strap needs to be placed at the tip of the straight tool.)

Adjust the length of the belt, convenient for changing the band!

Everybody can easily adjust the band if only this set.

In case

Customized only for high-quality items that are easy to use, commercialize a convincing set of watchmakers as well.

★ Tool set that corresponds to a large trendy watch!

★ Authentic watch tool set also popular with watch lovers!

★ If you have this, exchange batteries and adjust the belt easily at home !!!

★ Luxury 13 point set that can correspond widely from beginners to enthusiasts !!!!

【please note】

● If you can not, please contact the watchmaker.

There is no warranty against breakage or accident etc of tools and wrist watches caused by using the tool.

● Special type of watch can not be used

● Handling of tools Please be careful to injury etc. when using.

● Please keep in the place where children's hands do not reach

※ When using the tool leads to injuries etc accident cause so please use cloth and gloves and not handle with bare hands.

* It can be used to eliminate different size watch bands.

You should be careful not to mistake the direction of the clock axis on the watch band.

It is necessary to hit the needle lightly on the watch band below the negative direction of the needle hole.

If you are confused about the directionality of the needle hole, you can try lightly striking the needle.

If you can not remove the needle, stop once to hit or destroy the watch band.

Please try the opposite direction.

Thank you very much.

In case

In case

This kit includes the following tools

Storage bag x 1

Pin remover × 1

3 point support opener × 1

Tweezers × 1

Fixture x 1

Bottom lid opener × 1

Spring stick removal × 1

Flathead screwdriver × 3

3 band pullout pins

★ Pin remover: For adjusting the length of the belt!

When you turn the handle, the pin will be pushed out.

★ 3 point support opener: Used when opening the screw back type lid.

★ Spring stick removal: To replace the watch band!

★ Minus Driver: For adjusting the size of the bellows belt etc!

★ Hammer: Used when the band's pin of the belt is rusted or dirty and can not be handled with "pin extractor"

Case opening knife

: Leave the wrist watch with one hand, hold the shell behind the clock in another hand

tweezers:

Suitable for grasping something small.

Spring stick removal:

It's amazing to fit easily

Spare bit included:

(3 different types) and tips for changing spring bar tool

3 point support opener:

Open steel table 3 steel teeth adjusted to the proper place Make yourself pressure on the table above, then back to the back cover bracket, cover the bayonet shape and turn back and select according to the clock

The left and bottom covers can be opened.

Strapwatch Springpie

: Connect the spring pin to the corresponding watch strap.

Features:

• Professional wrist watch Maintenance special tool.
• It is very useful for watch repair
• Adjust the length of the belt, convenient for changing the band!
• Everybody can easily adjust the band if only this set.
• We had no choice but to ask the watchmaker, belt size adjustment and battery exchange can also do this if there is this set!
• Beginner is also safe, professional carefully selected watch tool set, luxury set contained in a special storage case
• Detailed Set List: 1 3 Pin Case Opener 1 Case 12 Pin, 3 Pin Punch, 1 Spring Removal Tool 3 Driver, 1 Opening Knife, 1 Holder, 1 Hammer, Tweezers

Product information:

Shipping Weight: 485 g

Package Dimensions: 5.41 x 11.51 x 22.10 cm