Operating frequency: 80m 40m 30m-17m 15m-10m
Work mode: SSB CW AM,RTTY and FM-Reduced duty cycle
MX-P50A hf power amplifier, for QRP transceiver, Improve signal. Can be used bothas a base and mobile unit, Extremely Small Compact and light weight, Full integrationwith the FT-817 using the supplied interface cable, The amplifier incorporatesvarious protection circuits such as high VOLTAGE，front mounted LED display
Power Requirements: 13.8V 8A///Antenna Interface: SO-239 50Ω
It''s compact,light weight and easy to use.

Technical Details

Product Details

Package Dimensions
Width : 5.51 inch
Height : 1.57 inch
Length : 8.66 inch

Shipping Weight: 0 ounce (View shipping rates and policies)

ASIN : B071WP7KZQ

Product Description

YAESU FT-817ND Quick operating manual:
- Connect power cord to DC power supplier, Red to ''+'', Black to'' -''
- Connect ACC cable to FT-817 ACC and amp
- Adjustment ''BAND ADJ'' button,Select the band
- Connect antenna to amp ''ANT'' and ''input'' from FT-817 antenna out.
Note that the antenna you used that should well tuned, the SWR should less than 1:1.5 - Open the power on both power supplier and AMP. The power indicate on.
- Power on FT-817, the band indicate on Amp shoule be on.
- Press PTT, the TX indicate on Amp should be on

Note:
If working on FM or SSTV for long operating time, should lower the output power on FT-817, say 2.5W or 1W. Other QRP transceiver operating manual:
Connect acc cable to transceiver PTT-TX and amplifier,ACC green to''GND''，RED to''TX-PTT'',the radio ''TX-PTT''view manual.
Specifications:
- Frequency Band: 80m 40m 30m-17m 15m-10m
- Operating Modes: SSB CW AM， RTTY and FM-Reduced duty cycle
- Rf input: 5W
- Out power: 45W
- Band mode: Manual
- Power requirement: 13.8V 8A, RED ''+'' BLACK''-''
- Cooling method:passive air cooling
- Antenna connector: SO-239 50Ohm
- Size: 155*100*35mm D*W*H
- Weight: 0.55KG

Package list:
- 1x MX-P50M
- 1x Power cord
- 1x Control cable