PWM 40A 12V/24V Solar Charge Controller

Product Details:

Colour: Blue + Black

Max. Charge/ Discharge Current: 40A

System Voltage: 12/24VDC Auto

Max. Input Voltage of Solar Panel: 55V

Self-consumption: ≤12mA

LVD: 11.0V ADJ 9V…12V , x2 24V

LVR: 12.6V ADJ 11V…13.5V , x2 24V

Float Voltage: 13.8V ADJ 13V…15V , x2 24V

Boost Charging: 14.4V, x2 24V Battery voltage less than 12V start boost charging 2 hours

Battery Over Voltage Protection: 16.5V , x2 24V

Reverse Connection Protection: Yes

Load Over Current Protection: Yes

Charge Type: PWM

UBS Output: 5V 1.0A

Temperature Compensation: -24 mV/ ˚C for 12V system , x2 24V

Working Temperature: -20˚C ~ +55˚C

Terminal Scale: 14-6 AWG

Waterproof : IP32

Size: 192mm x 109mm x 44mm

Features:

1) LED screen display, 2 buttons to operate.

2) Automatically manage the working of solar panel and battery in solar system.

3) Overloading & short-circuit protection.

4) High efficiency intelligent PWM 3 stages charging.

5) The load control mode can be selected, the timer function can be reset for street light at night.

6) Reverse discharging & reverse-polarity protection.

7) Under-voltage and over-charging protection. Protection from lightning strike.

8) Prolong the battery life cycle and keep the load work well.

9) Easy to set up and operate. Suitable for small solar energy system.

10) This controller can charge and discharge at the same time.

11) The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature.

12) All loads can be switched off using the manual load switch on the controller.