For emulsion and gloss
One roller head for flat/matte paint
one roller head for gloss and varnish
Practical Size tray can be held in hand whilst using the roller.
Easy push-on,pull-off assembly.
Hollow handle to take extension pole.
A range of refills are available.
Cleaning instruction: 
Clean roller and tray after use.

Do not leave to dry out while taking a short break!

Ideally at the end of the job you should leave an almost empty tray and an uncharged roller. otherwise return all excess paint to the tin and wipe roller and tray as clean as possible with a cloth or paper tower.

After using emulsion,rinse roller and tray under tap.

Clean both throughtly in warm water (not Hot water) soap water then again rinse well in running water.Repeat if necessary.

Dry tray with a cloth.Shake excess water from roller(or dry with a cloth) then hang up roller to dry naturally.away from direct heat(such as radiator,boiler etc)

After using gloss,clean with brush cleaner or white spirit,soapy water followed by cold water rinsing.Avoid prolong soaking in brush cleaners as the powerful solvents may damage the rolleer.Hang up,allow to dry away from direct heat,then store.

It is always advisable to check paint trays for crack before use.