DSO112 is a pocket oscilloscope with color display and touch panel. What makes DSO112 distinguished among peers is its easy operations， which are all straightforward touching and scrolling. Almost everything is self-teaching. You would not get lost as you might do with other handheld scopes. Designed specifically for students and hobbyists， DSO112 is a great entrance level oscilloscope. With a size that fits right in your palm and pocket， DSO112 can do much more than you might think from its dimension. High sensitivity (5mV/Div)， high accuracy， and low noises are highlights of DSO112 and make it a useful tool for small signals probing. 2.4 inch TFT color LCD (320 * 240 in resolution)， 1200mAh Li-ion battery (included)， and built-in smart charger... all these add great convenience in use.

A pocket oscilloscope with color display and touch panel.

2MHz analog bandwidth and 5MSa/s Max. real-time sampling rate.

Unique rolling slow signal display， the display can be fully continuous signal， unlike SCAN mode will cause the signal display discontinuous.

Can save and recall waveform conveniently.

PC upload waveform data.

Freeze at any time waveform display (HOLD function).

Square wave test signal comes 1000Hz/3.3V.

Firmware upgradable via USB.

Battery/USB powered， built-in smart charger.

DSO112 is generally not suitable for measuring high-frequency circuits， such as USB， RAM， a wireless transmitter， etc.

Battery voltage must be within 3.7V-5V range.

Maximum input voltage is 50Vpk.

Do not attempt to measure live power directly.

Analog Bandwidth: 0-2MHz

Maximum Real-time Sampling Rate: 5MSa/s

Vertical Sensitivity: 5mV/Div-20V/Div 12 Gears (by way of Progressive 1-2-5)

Horizontal Time Base Range: 1μs/Div-50s/Div 21 Gears (by way of Progressive 1-2-5)

Maximum Input Voltage: 50Vpk(100Vpp)

Record Length: 512/1024 Optional

Input Impedance: 1M ohm

ADC Accuracy: 8Bit

Coupling: DC / AC

Trigger Mode: Auto (AUTO)， Normal (NORM) and Single (SING)

Trigger Edge: Rising / Falling Edge

Time cursors， can automatically calculate and display the time difference

Voltage cursors can automatically calculate and display the voltage difference

Display: 320 * 240 TFT Color Display

Power Supply: 3.7V 1200mAh Li-ion Battery(included) / USB Interface

Current Consumption: ~300mA @ 3.7V

Dimension: 70 * 80 * 18mm / 2.75 * 3.15 * 0.7in

Weight: 85g / 3.02oz

Package Size: 12.2 * 8 * 3.2cm / 4.8 * 3.15 * 1.26in

Package Weight: 157g / 5.54oz

1 * DSO 112 Oscilloscope

2 * MCX-clip Cables

1 * USB Cable

1 * User Manual (English)