THE STORY

Beware of PUNK. Smaller, tougher and louder than you would expect. Play it everywhere and take it anywhere. PUNK is fearless. Not afraid of water, dirt, or getting kicked around and gutsy enough to play music loud. If you won’t break the rules, PUNK will.

FEARLESS SOUND

Tiny, rugged, and ferociously loud, the deceptively small PUNK wireless speaker breaks all the rules. Crank up the volume and fill your room with sound or take the party outside. Your music will be heard.



YOUR MUSIC ANYWHERE

PUNK is water, shock and dust resistant, so it’s tough enough to survive in your bag, rugged enough for a mountain bike trek, and loud enough to be heard over crashing waves. And with eight hours of battery life (50% more than the other speakers its size), you will need to recharge before PUNK will.



SHARE YOUR MUSIC

PUNK is super social and pairs easily with any Bluetooth™-enabled audio device. Connect it to your home or car stereo via the 3.5mm jack and it becomes your Bluetooth hub, enabling you to control any stereo wirelessly from up to 60 feet away.



How to get the best wireless connection

Wireless headphones are great, they free you from cables. And with all wireless devices, obstacles can interfere with the quality of the Bluetooth signal -- human bodies being the worst.

Don't panic.

We've creatively inserted an extra-long antenna into Shadow's right-side cable for enhanced reception. We recommend carrying your device in the front-right pocket (not a back pocket) or resting it on a table in front of you.
 

Connect SHADOW to iPhone via Bluetooth:

 

  1. Turn on SHADOW and it will automatically go into Pairing Mode (Blue LED flashes as a heart beat)

  2. Now go to the settings on your iPhone, tap Settings > General > Bluetooth

  3. ON Bluetooth (swipe to turn on)

  4. Once you see SHADOW show up in the device list, select it

  5. You will hear a tone indicating that your pairing is complete

  6. You’re done - play music

 

Connect SHADOW to Android phone via Bluetooth:

 

  1. Turn on SHADOW and it will automatically go into Pairing Mode (Blue LED flashes as a heart beat)

  2. Now go to the settings on your Android phone, tap Apps > Settings > Bluetooth

  3. Turn ON Bluetooth 

  4. Press the scan button, it will look for visible devices

  5. Once you see SHADOW show up in the device list, select it

  6. You will hear a tone indicating that your pairing is complete

  7. You're done - play music

With dual-device (multipoint) connectivity, you can listen to music or watch a video on your laptop or tablet and take calls from your phone. You can even connect to a second phone.

 

  1. After pairing to initial device (i.e. a phone), press and release the multi-function button and Volume down button at the same time to turn multi-device connectivity on. You should hear “ready to pair” (LED will ‘breathe’).

  2. On the new device you want to pair (let’s say your laptop), go to the Bluetooth® menu on your device to pair and select SHADOW.

  3. Go back to the Bluetooth® settings on the first paired device to reconnect Shadow. Now you should have both devices connected and won’t have to pair them again.

  4. Every time you turn on SHADOW, you should hear 2 double raising tones, one per device.

PUNK

 

Connect PUNK to iPhone via Bluetooth:

 

  1. Hold the power button to turn on PUNK & press Bluetooth button for 2 seconds 

  2. You’ll also see the flashing blue light, which means it’s in Pairing Mode

  3. Now go to the settings on your iPhone, tap Settings > General > Bluetooth

  4. ON Bluetooth (swipe to turn on)

  5. Once you see “PUNK” show up in the device list, select it

  6. you’re connected and can play music

  7. You’ll hear the confirmation sound 

  8. you’re done

 

 

Connect PUNK to Android phone via Bluetooth:

 

  1. Hold the power button to turn on PUNK & press Bluetooth button for 2 seconds  

  2. You’ll also see the flashing blue light, which means it’s in Pairing Mode

  3. Now go to the settings on your Android phone, tap Apps > Settings > Bluetooth

  4. Turn ON Bluetooth 

  5. Press the scan button, it will look for visible devices

  6. Once you see “PUNK” show up in the device list, select it

  7. Now you’re connected and can play music

  8. You’ll hear the confirmation sound and can start listening to music

DECK ULTRA

 

  

Connect DECK ULTRA to iPhone via Bluetooth:

 

1.    Hold the power button to turn on DECK ULTRA

2.    The “M” button will be flashing blue light which means it’s in Pairing Mode

3.    Now go to the settings on your iPhone, tap Settings > General > Bluetooth

4.    Turn ON Bluetooth (swipe to turn on)

5.    Once you see “DECK ULTRA" show up in the device list, select it

6.    Now you’re connected and can play music

7.    You’ll hear the confirmation sound and you can now play music

 

 

 

Connect DECK ULTRA to Android phone via Bluetooth:

 

 

  1. Hold the power button to turn on DECK ULTRA

  2. The “M” button will be flashing blue light which means it’s in Pairing Mode

  3. Now go to the settings on your Android phone, tap Apps > Settings > Bluetooth

  4. Turn ON Bluetooth

  5. Press the scan button, it will look for visible devices

  6. Once you see “DECK ULTRA” show up in the device list, select it

  7. Now you’re connected and can play music

  8. You’ll hear the confirmation sound and you can now play music

 

 

 

 

 

 

Connect DECK ULTRA using NFC:

 

  1. Go to the settings on your Android phone, tap Apps > Settings > Bluetooth

  2.  Turn ON Bluetooth and select more

  3. Check to see NFC is turned on, if not enable it

  4. Tap your phone on the top of DECK ULTRA

  5. Your DECK ULTRA should automatically be turned on

  6. You should receive a notification to pair your DECK ULTRA to   your phone.  Select yes.

  7. You’ll hear the confirmation sound and can start listening to music

 
 

TRACKS AIR

  

Connect  TRACKS AIR to iPhone via Bluetooth:

  

  1. Hold the power button to turn on TRACKS AIR 

  2. You’ll hear the “TRACKS AIR is ready to pair” followed by a heartbeat

  3. Now go to the settings on your iPhone, tap Settings > General > Bluetooth

  4. Turn ON Bluetooth (swipe to turn on)

  5. Once you see “TRACKS AIR” show up in the device list, select it

  6. Now you’re connected and can play music

  7. You’ll hear the confirmation sound and can start listening to music

 

 

 

Connect to TRACKS AIR Android phone via Bluetooth:

 

  1. Hold the power button to turn on TRACKS AIR 

  2. You’ll hear the “TRACKS AIR is ready to pair” followed by a heartbeat

  3. Now go to the settings on your Android phone, tap Apps > Settings > Bluetooth

  4. Turn ON Bluetooth

  5. Press the scan button, it will look for visible devices

  6. Once you see “TRACKS AIR” show up in the device list, select it

  7. Now you’re connected and can play music

  8. You’ll hear the confirmation sound and can start listening to music

 

 

 

 

 

Connect to TRACKS AIR using NFC

 

  1. Go to the settings on your Android phone, tap Apps > Settings Bluetooth

  2. Turn ON Bluetooth and select more

  3. Check to see NFC is turned on, if not enable it

  4. Tap your phone against the right sound engine

  5. Your Tracks AIR should automatically be turned on

  6. You should receive a notification to pair your Tracks AIR phone.   Select yes.

  7. You’ll hear the confirmation sound and can start listening to music