The custom shield coating prevents any scratches and paint chips. Not only does it serve as a barrier against any damage or bugs, it can also be a way to stylize any automotive vehicle. Made in a form of an aerosol spray, this product is easy to apply and peel off as well. It is able to resist the weather and elements for up to 3 months.

1. 396g
2. Comes in 3 colours: Black, Clear, White

Application: Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks. For best results: Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside- down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Hold can 15-30cm from surface while spraying, moving back and forth, slightly overlapping each stroke.
Apply 3-4 coats, allowing product to dry completely between applications.
Before removing tape, re-spray along painted edges. Edges should be wet for tape removal.
Let dry before driving vehicle.
Do not apply over reverse sensors

Removal: Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remove