★Item Name★
Whole copy function with 12TB corresponding off-line clone of Wavlink HDD stand USB3.0 connection 2.5-inch / 3.5-inch SATA HDD / SSD without a compatible PC HDD
★Item Description★
In [Features] high-speed USB3.0 port, the maximum transfer rate is to be able to reach to 5 Gbps, and has a USB 2.0 / 1.0 and backward compatibility. And there is no need of [support] driver, also supports plug-and-play and hot swap. [Action] 2.5-inch and a 3.5-inch SATA hard disk connection will be two units can be mounted. At the same time, it is a whole with a copy function of HDD and SSD without a personal computer. [Design] vertical type, easy desorption design a free tool. With power switch and pilot lamp, it has been lightly control. [Package] 1x Wavlink USB3.0 HDD stand, 1x PSE certification AC12V4A power adapter, 1x USB3.0 cable, 1x Japanese + English instruction manual, 1x service card. Warranty period: 18 months, offers technical support to life. [high-speed, application]
USB3.0 to connect, with a USB 2.0 / 1.0 and backward compatibility, the maximum transfer speed is reached 5 Gbps (theoretical value), data it has stable transfer.
[The UASP] one Tsude of USB extensible specification used for connection
computer and peripherals, efficiency data transfer storage device such as a hard disk thing to increase the effective speed turned into. Utilizing physical layer of
USB, but rather than inefficient USB protocol, it turned into efficiency by using the SCSI protocol, to now as 170% transfer speed increase at maximum have. Lever both the host and the device does not correspond to the UASP, you can use the automatic high-speed transmission. If one or the other has not correspond to the UASP, it will be at that time, which is connected as a normal USB 3.0.
[convenient, easy]
without a personal computer, it is with a whole copy function One-key HDD and SDD.
vertical type, you can easily desorbed free tool.
a there is no need of drivers, also supports plug-and-play and hot swap. The
2.5-inch and a 3.5-inch SATA hard disk connection will be two units can be mounted.
Note: capacity of
target hdd / ssd must be in the above capacity of the original hdd / ssd. The
original hdd / ssd is inserted into the Source side, insert the target hdd / ssd to Target side. Position can not be replaced. In
[Humanize]
LED indicator light and progress light design, you will see the work status at a glance. With the
12V3A power adapter and cable, and provides a powerful power. In
humanization design, lightly to control the device, you will be comfortably spend the PC rice.
Wavlink is, 18 months warranty, and provide technical support to life. Please be assured.
After what you have any questions, please not hesitate to contact Wavlink.
[HDD offline clone]
put 1, AC power supply, do not connect a PC with a USB cable, Source side the original hdd / ssd It was inserted into, and insert the target hdd / ssd to target side.
2, Push OTG button until both HDD light LED flash,
3 release the button, hdd cloned in order to target, in order to start the execution from a source HDD , by pressing the OTG button again, clone action
