Nail polishing machine transformer with switch and the function of speed adjustment

Main board of the E-manicure, free to use as long as you set up the accessories

Metal grinding drill bit provides a coarse grinding as well as removing dead skin cells, keeping your nails polishing and healthy

Sanding bands give a finely cortex grinding and grinds nails edges, easy and advanced

Exquisite metal Grinding Drill Bits and sanding bands package

Very popular electric nail drill machine allows you to achieve results the same as salon quality at home

DescriptionThis 20000RPM Electric Nail Drill Machine Nail Art Manicure Pedicure Black is new and high quality, never used. It is professional electric nail machine with easy to use dialing speed control. Sleak design for comfort grip and comes with a stand for the machine and a foot pedal for easy operation.

FEATURES

  • New in retail box package
  • Compact handpiece easy to grip
  • Handpiece hold grinding head by mechanical clamping way, holding more reliable
  • Handpiece with heat sink, unwarming for long time using
  • Professional Electric Nail Machine with easy to use dialing speed control
  • Forward and reverse operation switch
  • Rotation speed reaches up to 20,000 RPM
  • Extremely quiet and smooth, no vibration when using
  • The drill can be controlled by foot pedal / main machine speed control
  • Foot pedal for easy operation and comfort
  • Good for pedicure and manicure
  • The nail file can be used for natural as well as artificial nails
  • For professional salon use or home use

Specifications

Power supply size 5.31 x 5.12 x 3.31 inch / 13.5 x 13 x 8.4 cm (L x W x H)
Handpiece size5.39 x 1.06 inch / 13.7 x 2.7 cm (L x Dia)
Sanding bands size 0.24 x 0.31 x 0.51 inch / 0.6 x 0.8 x 1.3 cm (Inner dia x Outer dia x L)
Foot pedal cable length55.91 inch / 142 cm
Power supply cable length65 inch / 165 cm
Cord of Handpiece length29.53-63.0 inch / 75-160 cm
Package size9.65 x 8.07 x 3.82 inch / 24.5 x 20.5 x 9.7 cm
Main (power supply & control) part:
Rated voltage range 100-120V 60 Hz
Output rated voltage DC 0-13V
Output current 1.5A
Shell MaterialPlastic
Handpiece (motor) part:
Working voltage DC 0-13V
Rated current 1.5A
Rated speed 0 -20000 rpm
MaterialSteel

Package Includes

  • 1 x Main (power supply & control)
  • 1 x Handpiece
  • 6 x Metal Grinding Drill Bit
  • 6 x Sanding bands
  • 1 x Foot Pedal Power Control
  • 1 x Purple Silicon Stand
  • 1 x English Manual

Extra Info

Installation and wire connection:
Connect the 5-pin plug of the portable hand piece to the Output socket at the main panel
Connect the pedal switch to the FOOT socket
Select proper drill bit according to actual requirements, and fasten it into the front of the portable grinding head
Switch the speed control to the left(Min)
Connect with the main source power
Operation:
1.Press the function switch to HAND for manual control,the indicator will be on and the grinding head starts to moving slowly
2.Turn the SPEED CONTROL to the right to accelerate the grinding head
3.When the function switch is pressed to FOOT, step on the pedal and the machine starts to work (foot switch is optional)
The turning directions can be swapped. FWD means clockwise direction and REV means counterclockwise direction
Adjust the speed of the grinding head within a reasonable range
Please adjust the handpiece to lowest speed before changing forward/backward direction
Instructions:
Don´t change the turning directions too frequently, otherwise, it will damage the grinding head
Turn the SPEED CONTROL counterclockwise to decelerate the grinding head the minimum before turning off and switch the main power source to 0
After operation, put the grinding head on the top of the main panel
While the grinding head is in operation, never pull out the 5-pin plug of the portable grinding head
For long idle time. please disconnect the source power
Any unauthorized disassembling of the product is prohibited